Q-See QH32DVR4C Record type, Copy to other days, Save, Setup time period and record type

Page 56

QH32DVR4C User’s Manual

Step 3: Record type

For “Rec Type”, the options are: All Time, Motion Detect, Alarm, MotionAlarm, and Motion&Alarm, command.

For all day record mode, only one record type can be selected.

Step 4: Copy to other days

You can repeat step 2 and step 3 to setup for other days. You can also copy the current day to other days.

Step 5: Save

Press “Confirm” to return to “Recording” menu. Press “Confirm” again to save the

parameters and return to the main menu.
Part time recording setup
Step 1: Enter into recording schedule menu
In recording menu, use ENTER	or EDIT	key to enable record function (“ ” flag), press
【	】【	】
“Schedule” button to enter into recording schedule menu.

Step 2: Select one day and disable all day recording option

For “Day”, the options are: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday and

Sunday. Use	keys to select a day. Move the “Active Frame” to the check box on the right
side of “All Day”, press ENTER or EDIT key to disable “All Day” option. “ ” means disabled

Input start time【↑】【and↓】stop【 time for】each【 time】period, and select record type for×each period. The record type options are: All Time, Motion Detect, Alarm, Motion&Alarm and MotionAlarm, command.

and “ ” means enabled.

Step 3: Setup time period and record type

There are 4 time periods for one day, and each time period can select a different record type.

Note: The time periods in one day can not be repeated.

Step 4: Copy to other days

You can repeat step 2 and step 3 to setup for other days. Also you can copy the current day to other days.

Step 5: Save

Press “Confirm” to return to the “Recording” menu. Press “Confirm” again to save the parameters and return to the main menu.

Note:

1)If record type is “Motion Detect” or other related type, you must setup “Motion Detection” in order to trigger motion recording (refer to Chapter 5.10).

2)If record type is “Alarm” or other related type, you must setup “Alarms” in order to trigger alarm recording (refer to Chapter 5.13).

3)The time period is between 00:00—24:00.

56

Image 56

Contents QH32DVR4C QH32DVR4C User’s Manual QH32DVR4C User’s Manual Website Customer Service Product Introduction Storage FunctionsOthers Preview & Playback FunctionsNetwork Functions Installation Checking the DVR and Its AccessoriesHard Drive HDD Installation Installation Notice Installation ToolsQSC26404 Rear Panel System SetupRear Panel Description Operational Instructions Front PanelFront Panel Form 3-1 Items on Front Panel Index Type Name Description【】【】 IR Remote Control Index Name DescriptionLoading the Batteries Into the Remote Control【】 Starting the Remote ControlDisabling the Remote Control Powering Down the DVRMenu Description Menu Options Form 3-3 List of Menu OptionsMain Menu Description How to Enter Into Menu ModeMenu Operation Key to select number, upper case, lower case or symbols You can use To select oneKey to enter into Edit status, you can input text in the boxInput Text How to Exit MenuKey to exit menu and return to preview mode Basic Operation Guide Power On Light is off, please do the followingLight is green. On the monitor or VGA display Key to display or hide the camera status barRecording status Form 4-1 Camera record status Icon Icon Color Status DescriptionAlarm status Key to switch to multi-screen viewUser Name and Password LoginChange Password Input passwordChange users’ password Keys. As .6 showsPTZ Pan, Tilt, Zoom Control PTZ Control InterfaceAdjust Preset Description Select ChannelPTZ Control Keys Description Press Key to select the PTZ camera on channelStart/Stop Auto in PTZ Control Mode 【Exit PTZ Control】 ModePress ESC or Enter to exit and return to preview mode Manual【】Record【】Playback Description10 Playback interface To select recorded file type. The file type options areList box. You can use Open/Close sound To pause/continue playback. If played frame byFrame, Press Copy segment Edit Stop copyPlayback With Mouse Attached Control Bar FunctionsBar stays at the file you want to backup, press Edit Backup Recorded FilesPlayback interface, you can backup the recorded files 12 Playback list Again to stop selecting. This segment is selectedShutting Down the DVR Please refer to ChapterParameters Setup Guide Administrator and PasswordEnter into administrator menu Password ModificationUser management Add and Delete Users Enter into User Management interfaceSteps are as follows Add UserSetup the password for new user Add new user nameSetup the rights for new user Save the new user’s password and rightsPress Cancel or ESC to abort deleting. As shown in fig User rights description LocalRemote through network or internet MAC AddressEffective. Press Cancel button or ESC Unit Name and Device IDConfirm button and press Key to abort modificationVideo Output Standard and VGA Setup Press Confirm button to save or Cancel to abortVGA setup Device IDCamera Name Position To save the changeCamera Name Display menu, you can setup DVR system date and time Move your active frame to Date/Time setup and press enterReturn to Camera menu, and press Confirm button to save it. Then use Key to select OSD format. Here are the OSD formatsVideo Parameters Setup Date OSD PositionTo abort modification Select camera Please useSatisfied with the real time video image, press Enter Mask Area Setup 22*18 panels 22*15 for NTSC, you can use Keys to moveDisabling the mask check box cancels the mask area Here is an example of the mask area function shown as figSelect sensitivity View Tampering AlarmEnter into Camera menu Select camera Please use Video Loss Alarm Enter into Camera menuSave alarm setup After your setup, press Confirm buttonMotion Detection Enter into Camera menu Select camera UseClear motion area Clear all motion areas Press】【 Preview Properties QH32DVR4C User’s Manual Recording Setup Recording menu descriptionBit Rate Type All day recording setup Enter into recording schedule menuSelect a day and enable all day recording option Select one day and disable all day recording option Setup time period and record typeRecord type Copy to other daysExternal Alarm Input and Relay Output External alarm input setupAlarm type Enter into Alarm in Handling sub menuAlarm trigger record channel setup Schedule for alarm handle methodAlarm handle method Save setupPTZ Linkage Alarm relay output setup Alarms menu, use Select delay timeEnter into alarm out schedule Setup alarm out scheduleExceptions Network Parameters Network menu descriptionAdvanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ Pan, Tilt, Zoom PTZ menu descriptionPreset setup Sequence setup Iris FOCUS+ FOCUS- ZOOM+Cruise setup Restore Parameters UtilitiesUpgrade Stop Alarm Out RebootPower Off Hard Disk ManagementView Log By Type&Date For example The steps of viewing alarm logBy Time System Information Firmware Upgrade FTP Server SetupSetup username Upgrade Mode Drag the left key Single click the left keyRight click MovingClick the right key Scroll wheel forwardAppendix B HDD Capacity Calculation = d i ⎟ 8 ⋅ 3600 ⎟1024RJ45 introduction Pin definition Appendix C DVR Connect Cable DefinitionMaterial and tool QH32DVR4C User’s Manual Appendix D DVR Specifications Appendix D Camera Specifications Models QOCDC60 QOCDC36Appendix E Troubleshooting Failure Possible reasonsAppendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service