Q-See QH32DVR4C user manual To save the change, Camera Name Position

QH32DVR4C User’s Manual

5.5 Camera name and OSD (On Screen Display) Setup

Camera Name

In “Camera” menu, you can input a name for each camera. See fig 5.9 Please note that a camera’s name can not be copied.

Fig 5.9 Input camera number

The steps to setup camera name:

Step 1: Select a camera.

Step 2: Move “Active Frame” to camera name edit box, press EDIT key to enter

into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4). The camera name can support 32 characters.

Step 3: Press ENTER	key to exit edit status.
Move “Active Frame” to “Confirm” button, press			ENTER	to save the change
		【	】
and you can see the new camera name. Press “Cancel” button or 【ESC 】key to abort.
Camera Name Position			【	】
If you do not want to display a camera name, just disable the check box beside
camera name edit【box. The	】disable flag is “ ”. If you enable the check box, you can
	40 ×

setup the camera name position. You can copy the position to any other camera. The setup steps are: