Paragon GSM/WiFi Dual-Mode Mobile Phone, CECT P800 Signal Strength Indication, Phone locking

Paragon Wireless dual mode mobile phone user’s manual Page 8

Warning:

The prescribed charging temperature is 0℃－45℃ (32F－113 F). Please do not use charger when the temperature is out of this range. Only use the charger provided by the manufacture. Using an unauthorized charger may be hazardous and void the warranty of your phone.

1.3.4Signal Strength Indication

While the phone is in operation, the signal strength level is on the left top corner of the screen. The signal strength is shown with a four level indicator. When there is no indicator, the signal strength is at its weakest and you will be unable to make a call, send/receive messages or use any other network-related services. When the indicator has four bars, the signal strength is at its strongest. Voice and signal quality is to a great extent affected by obstacles, so moving around may effectively improve signal quality.

1.3.5 Power-up and Power-down the phone

Press and hold the

Pwr button for about three seconds to power up the phone. A startup image

will be shown once the phone has been powered up properly. Press and hold the Pwr button when the phone is ON to power it down. A power down image will be shown.

1.3.6Phone locking

To prevent unauthorized usage of the phone, you can lock the phone manually or automatically. To lock and unlock the phone, a configurable password is required. The factory default password to lock the phone is 0000. The password can be changed by using the Setting-> Security Settings-> Change password function.

Recommendation: The owner of the phone should reset the 4-digit lock password as soon as the phone is purchased.

1.3.7Function selection and operation

phone book

call history

user documents, pictures, and multimedia files

setting

dial panel