|
| Making Calls | ||||||||
| ENGLISH | |||||||||
|
| |||||||||
before you can make or receive calls. |
| |||||||||
|
| The network operator name must |
|
|
|
|
|
|
|
|
|
| appear in the center of the display |
|
|
|
|
|
|
| |
|
| Signal strength is indicated by the | ||||||||
|
| bars in the top right of the display (six |
2bars for optimum signal strength).
2.1
Call quality can be affected by physical obstructions, so moving only a few metres may significantly improve signal strength.
National Calls
●if the country you are operating in uses area codes, they must be included even when making local calls.
‘CALLING’ appears during dialling and changes to ‘ACTIVE’ when connected
AREA CODE NUMBER (if used)
● to hang up at the end of the call press or close the flip (even if the other person hangs up first)
Calls to a Fixed Phone Extension
●some fixed extension phones cannot be called directly, you need to connect to the exchange before dialling the extension number. The phone will do all the dialling for you with one key press provided that you enter a pause
extension number. To enter a pause, press three
times (shown as below)
AREA CODE NUMBER EXTENSION (if used)
International Calls
●unlike most fixed phones, you don’t need to enter a separate exit code to get an international line out of the country you are calling from, simply enter ‘+’ (by pressing until + is displayed), the code of the country you are calling and the full telephone number
COUNTRY CODE FULL NUMBER
●for example, to make a call to France:
(+ displayed) FULL NUMBER
Call List
●called and received numbers are stored as a list in the phone with the last number at the top of the list. Each number is identified as outgoing, incoming, SMS or missed. Old numbers are automatically deleted when the
call list is full. To see the list (latest) (search)
●any displayed number on the list can be dialled by pressing
●the call list can be reset (cleared)
ENGLISH
2
2.2