Maxon Telecom MX-6880 dimensions Set Time, Unlocking the SIM, Connecting to the Network

ENGLISH

1

1.7

Set Time

● enter the current time. For example if the time is 12:34

(Use the key to clear an error)

Unlocking the SIM

To prevent unauthorized use, the SIM is protected by a PIN1 (Personal Identity Number) code. When enabled, you must enter the PIN1 each time you switch your phone ON. This will unlock the SIM and allow you to make and receive calls. You can choose to disable the PIN1 (refer to section

3)in which case your SIM will not be protected against unauthorised use.

● press and hold to switch the phone ON

● enter the PIN1 then

(use the key to clear an error). For example if the PIN is set to 1234

If you enter the wrong PIN1 three times in succession, your SIM will be barred from the network and the phone will ask for the PUK 1. Refer to section 10 for help.

IMPORTANT: The supplied PIN1 (4 to 8 digits) may be a standard number used for all SIM’s issued by your network operator, you should therefore change it to any personal number of your choice as soon as possible. Please refer to section 3 for instructions.

Connecting to the Network

After unlocking the SIM, the phone will make an automatic search for your home network or another suitable operator in your location (SEARCHING Displayed). When connected, the name of the operator appears in the center of the display.

Your mobile phone is now in standby mode, ready to make and receive calls.

EMERGENCY CALLS ONLY means that you are outside co-operating network coverage but you can still make emergency calls subject to signal strength.

ENGLISH

1

1.8