Weslo WCTL35090 user manual Assembly

Page 6

ASSEMBLY

Assembly requires two people.

Set the treadmill in a cleared area and remove all packing materials. Do not

 

dispose of the packing materials until assembly is completed.

Assembly requires your own phillips screw-

driver

, two adjustable wr

enches

, and scissors

.

1. Note that the right Handrail and the Console Base (not shown) are connected to the treadmill by a Wire

Harness. During assembly steps 1 through 5, be careful not to pull on or damage the Wire Harness.

With the help of a second person, carefully lay the treadmill on its side. Position one of the Base Legs

(38)on the base of the Upright (31) as shown. Make sure that the Base Leg Pads (41) and the Front Wheel (39) are in the indicated positions. Attach the

Base Leg with two 3/8” x 2” Bolts (43), two 3/8” Washers (44) and two 3/8” Nuts (34).

Carefully turn the treadmill onto its other side.

Assemble the other Base Leg (38) as described.

With the help of a second person, carefully raise the treadmill to the upright position so the Base Legs

(38)are resting flat on the floor.

2.Refer to HOW TO LOWER THE TREADMILL FOR

USE on page 12. Follow the instructions in step 2 to lower the treadmill.

Cut the plastic ties that hold the cage nuts in each Handrail (32).

Position the left Handrail (32) on the left Upright

(31).Thread a 1/4” x 1” Bolt (23) with a 1/4” Washer

(22)two turns into the upper end of the left Upright

and the left Handrail. Do not tighten the Bolt yet.

Thread a 1/4” x 1” Bolt (23) with a 1/4” Washer (22) two turns into the lower end of the left Handrail (32)

and the left Upright (31). Do not tighten the Bolt yet.

3.With the help of a second person, hold the Console

Base (12) and the right Handrail (32) near the right Upright (31) as shown. Feed the excess Wire

Harness (28) into the right Handrail (32) and then insert it down the right Upright. Next, insert the bracket on the right Handrail into the right Upright.

Be careful not to pinch the Wire Harness.

1

43

 

39

 

44

31

41

34

38

2

 

23

22

 

 

32

 

31

 

22

 

23

3

 

12

 

Bracket

 

 

28

32

 

 

31

6

Image 6
Contents Model No. WCTL35090 Serial No Customer ServiceQUESTIONS? Serial Number DecalTable of Contents Important Precautions Erty damage sustained by or through the use of this product Front Before YOU BeginFor your benefit, read this manual carefully before BackAssembly Right Upright 31. Do not tighten the Bolt yet Right HandrailYet Make sure that all parts are tight before you useOperation and Adjustment Diagram of the Console Battery InstallationStep by Step Console Operation Can be restarted Reset the console and start the walking beltReset position Follow your progress with the three displaysHOW to Select Kilometres and Miles HOW to Fold and Move the TreadmillHOW to Change the Incline Treadmill HOW to Fold the Treadmill for StorageStorage latch locks over the frame guide HOW to Move the TreadmillHOW to Lower the Treadmill for USE To protect the floor or carpet from damage, place aMaintenance and TROUBLE-SHOOTING CordSolution Problem The walking belt slows when walked onIf the walking belt has shifted to the left Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Page Date Customer RecordModel No Serial No AddressOrdering Replacement Parts De l’Industrie St-Jérôme, Québec Canada, J7Y 4B8Limited Warranty Icon of CANADA, 900 de l’Industrie, St. Jérôme, QC J7Y 4B8Part No J02204-C R0602A Remove this Exploded Drawing and Part List from the Manual Part LIST-Model No. WCTL35090 Qty DescriptionExploded DRAWING-Model R0602A