To Light continued
■Screw propane cylinder into lantern. Take care not to cross- thread. Hand tighten only.
■Set legs of base in outer position.
■Set lantern into base.
CAUTION
Match Light Lantern
■Push lighted match through light- ing hole, hold near mantle and open fuel valve fully.
INSTASTART™ Electronic Ignition Lantern
■Turn fuel valve on. The valve will click and a spark will jump between electrodes and ignite the mantles.
•SERVICE SAFETY
•Keep all connections and fit- tings clean. Inspect propane
cylinder and lantern propane connections for damage before attaching.
•During set up, check all con- nections and fittings for leaks using soapy water. Bubbles indi- cate a leak. Never use a flame.
WARNING
•BURN HAZARD
•Never leave lantern unattended when hot or in use.
• Keep out of reach of children. | 7 |