SECTION
Using the Front Panel
NOTE: For this procedure, refer to FIGURE 2.5.
| DETAIL “A” - MA80 FRONT PANEL |
| |||
|
| Fowler |
| Low Pressure | |
Power |
| Power Fail | LED | ||
Pulse Button | Button | ||||
Button | LED |
| |||
|
| ||||
|
|
| |||
Static Button |
|
| Max Inflate | Lock/Alarm | ||
| Soft Button |
| Button | |||
| LCD | Firm Button |
| Button |
| |
| Display |
|
|
|
| |
|
|
| ||||
| DETAIL “B” - MA85 FRONT PANEL |
| ||||
Power | Alternating | Fowler | Power Fail | Low Pressure | ||
Button | LED | |||||
Button | Pressure Button | LED | ||||
|
| |||||
Static Button |
| Max Inflate | Lock/Alarm |
Soft Button |
| Button | |
LCD | Firm Button | Button |
|
Display |
|
|
|
FIGURE 2.5 Using the Front Panel
Power Button
1. To turn the control unit on or off, press and release the Power button (
).
NOTE: Once the unit is plugged in, an AMBER LED on the control unit is lit indicating that the system is in STAND BY mode. Once the Power button is pressed and released, a GREEN LED illuminates indicating that the control unit is on.
NOTE: If the power comes on after a power outage, the control unit will go through its system initialization routine for a few seconds and then resume the desired function.
MA80 Series | 14 | Part No 1148138 |