22
ASSEMBLY
STEP 5: Assemble Computer Console
A)Rotate the console until it stops as shown in diagram below .
B)Tighten the screw (807) of the console connect tube (213) for right and left side . Console connect tube (213) will be adjust for the next steps of assembly .
C)Attach the Handle Bar Cover - LR (208) to the underside of the console and the inside of the left upright (301), Secure with four M4×15mm screw (802). And secure with two M4×15mm screw (802) between the Handle Bar Cover - LR (208) outside and the console housing
D)Attach the Handle Bar Cover - LL (207) to the top of the console and the outside of the Upright - Left (301).And secure with four M4×15mm screw (802).
E)Repeat the above process for the right hand side cover (209) and cover (210) as shown in diagram.