Smooth Fitness 5.15E user manual P6 Heart Rate Control

Page 21

21

www.smoothfitness.co.uk

HEART RATE CONTROL

P6 HEART RATE CONTROL

If you select the P6 5K HEART RATE CONTROL program, the upper and lower LCD will show the following:

After completing the user information set up, the TIME LCD shows the blinking factory pre-set workout time 60:00. Press the INCLINE UP/DOWN buttons to adjust the workout time and press the STOP/ENTER button to confirm. Then the upper LCD shows initial speed 2.0MPH/3.2KPH and the lower LCD shows initial warm up time 3:00.

Press the START button to start the 3 minutes WARM UP program. Speed starts from 2.0MPH/3.2KPH and INCLINE LEVEL starts from level 0. Please keep your hand on the hand pulse grips all the time during this workout in order to monitor your pulse correctly. During the program, if the heart rate monitor fails to sense the pulse you will see P blinking on the PULSE LCD. If the heart rate monitor senses the pulse properly you will see the stable heart beat sign on the PULSE LCD and the correct pulse readout on the PULSE LCD. The computer will sense the user pulse every 30 seconds. During the warm up program you can press the STOP/ENTER button to pause or stop the program or press the START button to re-start the program. Other buttons will not react during this warm up process.

During the warm up program if heart rate monitor fails to sense the user’s pulse (The PULSE LCD will display P and blink), the computer will not change the speed. If heart rate monitor senses the user’s pulse properly and the actual user’s pulse does not reach 65% of the maximum heart rate ((220-age) x 65%), then speed will increase by 0.5MPH/0.8KPH per 30 seconds. If the actual pulse reaches 65% of the maximum heart rate, the speed will remain unchanged. If the actual pulse reaches 65% of the maximum heart rate over one minute, then the speed will be maintained the same until the warm up program finishes.

If the actual user’s pulse fails to reach 65% of the maximum heart rate within the first 3 minutes of warm up, the computer will continue the second 3 minutes warm up program. All workout information continues to count up and the timer counts down from 3:00. During the second 3 minute warm up, the computer will change the incline level instead of speed. If the heart rate monitor fails to sense the user’s pulse (The PULSE LCD will display P and blink), the computer will not change the incline level. If the heart rate monitor senses the user’s pulse properly and the actual user’s pulse does not reach 65% of the maximum heart rate ((220-age) x 65%), then the incline level will be increased by 1 level per 30 seconds. If the actual pulse reaches 65% of the maximum heart rate, the incline level will remain unchanged. If the actual pulse reaches 65% of the maximum heart rate over one minute, then the speed will be maintained the same until the warm up program finishes.

If the actual user’s pulse fails to reach 65% of the maximum heart rate within the second 3 minutes of warm up, the computer will continue the third 3 minutes warm up program. All workout information continues to count up and the timer counts down from 3:00. During the third 3 minutes warm up, both speed and incline remain unchanged regardless of the actual pulse. If time counts down to 0 and 65% of the max. heart rate still can not be reached, the TIME LCD will show FAIL, and the program will stop and return to POWER ON status.

After the warm up program (if the actual pulse reaches 65% of the max. heart rate to complete warm up program), the computer will enter the HEART RATE CONTROL program. TIME counts down from the previous setting. Distance and Calories will continue counting up from the warm up program. During the HEART RATE CONTROL program, the heart rate monitor will sensor the actual user’s pulse every 30 seconds. If the actual user’s pulse does not reach 85% of the max. heart rate, then the incline level will be increased by 1 level every 30 seconds. If the actual user’s pulse reaches 85% of the max. heart rate, then the treadmill performance will be remained the same. If the actual user’s pulse is above 85% of the

max. heart rate, the incline level will be reduce by 1 level. Speed will remain unchanged until the incline level increase up to 15% or the incline level down to 0%. If the incline level is up to 15% and still 85% of the max. heart rate can not be reached, then speed will start increasing by 0.5MPH/0.8KPH every 30 seconds. If the incline level is down to 0% and still lower than 85% of the max. heart rate can not be reached, then the speed will lower by 0.5MPH/0.8KPH every 30 seconds.

If the actual user’s pulse reaches above 85% of max. heart rate over 3 minutes, the HEART RATE CONTROL program will be shut down and the computer will enter the one minute COOL DOWN program.

When the TIME counts down to 0, the HEART RATE CONTROL program is completed, and the computer will enter the one minute COOL DOWN program.

After the COOL DOWN program, the computer will return to POWER ON status.

The purpose of the HEART RATE CONTROL program is to keep the user’s pulse between 65% of the max. heart rate and 85% of the max. heart rate as to reach the most efficient workout result.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents USER’S Manual 15E Motorized TreadmillPrecautions Power Requirements Power RequirementsPreassembly Hardware Comparison Chart Hardware chartDescription QTY Description Qty Order No Parts ListParts List Parts Diagram Parts Diagram Step AssemblyAssembly Handlebar front end cap are now assembled by the factory Assembly Folding Instructions Folding InstructionsUnfolding Instructions Unfolding InstructionsComputer Operation Start Button Safety KEY STOP/ENTER Button Button FunctionsStop / Enter Speed DownSET UP User Information Display ModeSET User Weight English / Metric ConversionSET User AGE SET User HeightSET User Target Heart Rate Operate ProgramP3 Interval Speed Cool DownP5 5K Self Learing / Competition P4 Weight LossP6 Heart Rate Control Heart Rate ControlLevel Adjustment Level AdjustmentHOW to Maintain the 5.15E Treadmill MaintenanceTo apply lubricant to the walking belt CleaningFrame Drive Electronics Parts Labor Motor Lifetime WarrantyBefore beginning Important StepsTarget Heart Rate Finding your pulseAerobic exercise Targeted muscle groups Muscle ChartWarm up and cool down Stretching RoutineToe Touch Shoulder LiftInner Thigh Stretch Hamstring StretchSide Stretch Calf-Achilles StretchTroubleshooting Treadmill will not start TroubleshootingTreadmill looses power during use Treadmill walking belt slows during use

5.15E specifications

The Smooth Fitness 5.15E is an exceptional elliptical trainer designed for those seeking a comprehensive low-impact workout in the comfort of their home. This model stands out for its combination of user-friendly features, advanced technology, and robust construction.

One of the hallmark features of the 5.15E is its advanced elliptical path, which mimics natural walking and running motions. This design ensures a smooth and comfortable experience, reducing stress on the joints while effectively engaging the muscles. With an adjustable incline, users can customize their workouts by increasing resistance and targeting different muscle groups, making it ideal for various fitness levels.

The user-friendly console is another notable characteristic of the 5.15E. It incorporates a large LCD display that tracks essential workout metrics including time, distance, RPM, calories burned, and heart rate. This real-time feedback helps users monitor their progress and stay motivated throughout their exercise regimen. The elliptical also comes equipped with built-in heart rate sensors, allowing for accurate tracking of cardiovascular performance.

The 5.15E boasts a variety of pre-set workouts that cater to different fitness goals, from weight loss to endurance training. Users can select from multiple programs, each designed to push their limits while keeping workouts engaging and effective. Moreover, the elliptical trainer features convenient quick-access buttons, enabling users to adjust resistance and incline without interrupting their flow.

In terms of construction, the Smooth Fitness 5.15E is built to last. With a solid steel frame and a weight capacity of up to 300 pounds, this machine is suitable for a wide range of users. Its sleek, compact design allows it to fit easily into most home gym spaces, while the transport wheels make it easy to move or store when not in use.

The Smooth Fitness 5.15E also emphasizes user comfort with features like oversized foot pedals that provide stability and support during workouts, reducing the risk of slipping. Additionally, the elliptical includes integrated speakers and an audio jack for users who want to listen to music or utilize workout apps while exercising.

In conclusion, the Smooth Fitness 5.15E is a well-rounded elliptical trainer that combines innovative features, advanced technology, and durable construction. It caters to users looking for an efficient, low-impact workout that can quickly become a cornerstone of their fitness routine. Whether you're a beginner or a seasoned athlete, the 5.15E offers the versatility and performance needed to achieve various fitness goals.
Top Page Image Contents