TROUBLESHOOTING YOUR FITNESS BIKE
G E N E R A L
Our Bikes are designed to be reliable and easy to use. If, however, you have a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: 1) Pedal bike to light up console.
SOLUTION: 2) Replace 9 Volt battery in back of console.
PROBLEM: The Bike is making a clicking noise.
SOLUTION: Using a 15MM wrench, remove both the right and left pedals. Apply grease to the threaded portion of the pedals and reassemble the unit, making sure the pedals are as tight as possible.
PROBLEM: The Bike appears to work, but there is no resistance change.
SOLUTION: The magnetic brake assembly is not working properly; please contact your retailer.
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all the bolts on the Bike again.
PROBLEM: The seat on your recumbent bike rocks from side to side.
SOLUTION: With a 13MM wrench, loosen the Fixing Nuts on the side of the seat frame. With an
2211MM wrench, pivot the Adjusting Post so the Fixing Nut is at the top of the slot. Tighten the Fixing Nut with the 13MM wrench.
NOTE: If the above steps do not remedy the problem, discontinue use and contact your retailer.