Star Trac E-TBT manual Preventative Maintenance, Daily Maintenance, Weekly Maintenance

Page 24

7.If desired, you can use the personal cooling fan during your workout (see “Using the Cooling Fan” for details).

8.If desired, you can use the SelectFit™ feature to alter or remove upper body workout for the program (see “Using SelectFit™” for details).

9.You can scroll through workout data during the program (see "Viewing Workout Data During a Program” for details).

10.If you wish to pause the program, stop striding. The Total Body Trainer will enter pause mode and display your workout results for one entire cycle.

11.When you have reached your workout goal, the Total Body Trainer enters the Cooldown cycle (see “Cooldown Cycle” for details). If you wish to exit the program before you have reached your workout goal, stop striding and allow the Pause timer to expire.

PREVENTATIVE MAINTENANCE

With durable, high performance components, STAR TRAC Total Body Trainers are designed for heavy usage with minimal mainte- nance required. To keep your Total Body Trainer in top condition, Star Trac strongly recommends performing the regular daily, weekly and monthly preventive maintenance routines outlined below. Any unusual symptoms, such as a loud continuous noise during opera- tion, should be reported to STAR TRAC PRODUCT SUPPORT DEPARTMENT at (800) 503-1221, or USA 1-714-669-1660.

DAILY MAINTENANCE

Remove excessive accumulations of dust, dirt, and other substances by using a clean, soft cloth and a non-abrasive liquid cleaner, such as Formula 409TM or FANTASTIKTM. Wipe down the exterior of the display panel, upper body arms, pedals, shrouds and heart rate grips.

NOTE: DO NOT spray the cleaner directly onto the Display Panel or heart rate grips.

WEEKLY MAINTENANCE

Perform the following services each week:

Vacuum the floor under and around the Total Body Trainer. Move the Total Body Trainer to another spot, if necessary, to vacuum thoroughly.

Inspect the Display Panel mounting screws for security, and retighten if necessary.

Inspect the Display Panel keypads for wear.

MONTHLY MAINTENANCE

Perform the following services each month, or as needed:

Check that the pedals and shrouds are secure.

Check the upper body arms for looseness. Tighten screws as necessary.

Check for smooth and quiet operation of all moving parts.

24

STAR TRAC E SERIES TOTAL BODY TRAINERS OWNERS MANUAL

Image 24
Contents Star Trac FitnessTM Table of Contents TBT Total Body Trainer Introduction About this ManualSafety Instructions PrecautionsDo Not Veiligheidsinstructies WaarschuwingConsignes DE Sécurité Mise EN GardeSicherheitsvorschriften WarnungInstruzioni DI Sicurezza AttenzioneInstruções DE Segurança AdvertênciaInstrucciones DE Seguridad AdvertenciaSikkerhedsinstruktioner RådAdvarsler This page Intentioally Blank Assembly and Setup Unpacking and AssemblyTools Required Install the Upper Body Arms Display Panel Features Operating InstructionsPage Selectfit Panel Features Soft Trac SystemHints and Tips for Getting Started Viewing Workout Data During a ProgramPause Mode Using the Personal FANUsing Selectfit Cooldown CycleHeart Rate Monitoring Quick StartContact Heart Rate Monitoring Chest Strap Heart Rate MonitoringPreset Programs Manual ProgramTo operate the Manual program Total Body Program To operate the Total Body programAuto Pilot Program Random Hill / Alpine Pass ProgramsTo operate the Auto Pilot program To operate the Random Hill or Alpine Pass programTraining Tools Programs Heart Rate Control ProgramsTo operate the Dynamic Heart Rate Control program Heart Rate Training Range Upper LevelTo operate the Constant Heart Rate Control program Constant Watts Program To operate the Constant Watts programPreventative Maintenance Daily MaintenanceWeekly Maintenance Monthly MaintenanceManager / Maintenance Mode Manager ModeMaintenance Mode PB-UB Troubleshooting Service MessagesRegulatory Information FCC and Other Domestic RegulationsCanadian DOC and Other Regulations European ApplicationsPage Star Trac
Related manuals
Manual 30 pages 53.79 Kb