MANAGER / MAINTENANCE MODE
After using your STAR TRAC S SERIES TREADMILL for a period of time, you may wish to change some of its settings.
MANAGER MODE
The Manager Settings allow you to query and modify the basic settings of your treadmill. To enter Manager Settings:
1.Press and hold the 
, 
and 
keys together.
2.A beep will sound and “MANAGER SETTINGS” will scroll once across the PROFILE Window.
3.Release all keys. “SN” will display in the PROFILE Window; the associated numeric value for the parameter will display in the DISTANCE Window.
NOTE: The system will automatically exit Manager Settings if no key is pressed for 30 seconds.
The following keys are used to modify MANAGER SETTINGS:
Increase and Decrease Incline Keys: Display the next (Increase) and previous (Decrease) parameters. Keys may also be used to enter the desired value for the currently displayed parameter. Keys will repeat if held.
Numeric Keypad: Facilitates entry of the desired value for the displayed parameter. These keys do not save the new value – see OK Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. “UPDATING” will scroll once across the PROFILE Window while the update is in process. When the update is complete, the PROFILE Window will show the new value for the parameter.
NOTE: To exit Manager Mode without saving any values or settings, press the STOP key.
NOTE: Unless otherwise specified, the | Item (parameter) name is shown in the PROFILE Window, and the value of the | ||||
parameter is shown in the DISTANCE Window. |
| ||||
The items that you may display and change with the previous keys are: | |||||
|
|
|
|
|
|
| Lowest | Highest |
| Default |
|
Item | Value | Value |
| Value | Meaning |
|
|
|
|
|
|
SN | 0 | 9999 |
| N/A | Serial Number. S Series Treadmill serial number (set by factory). |
DSW | 1.0 | 99.99 |
| N/A | Display Software. Display panel software version number (set by factory). |
|
|
|
|
| NOTE: Software checksum value is displayed in CALORIES Window; Window; |
|
|
|
|
| software Build value is displayed in TIME Window |
OHR | 0 | 9999 |
| 0 | Operating Hours. Total operating hours. |
DST | 0 | 9999 |
| 0 | Distance. Total distance traveled in miles or kilometers, based on current UNx |
|
|
|
|
| setting. |
UNx | UNE | UNM |
| UNE | Units. UNE (English) = units of pounds, miles, feet, inches |
|
|
|
|
| UNM (Metric) = units of kilograms, kilometers, centimeters |
|
|
|
|
| NOTE: Current value is shown in PROFILE Window. |
TIM | 5 | 99 |
| 99 | Time. Maximum time in minutes allowed for a program, excluding cooldown. |
WGT | 1 (lb) | 500 (lb) |
| 155 (lb) | Default Weight (to user). Typical weight in lb (UNx = UNE) or kg (UNx = |
| 1 (kg) | 226 (kg) |
| 70 (kg) | UNM). |
Lxx | N/A | N/A |
| LEN | Language. Display language; either LEN (English), LGE (German), LSP |
|
|
|
|
| (Spanish), LDU (Dutch), LPO (Portuguese), LFR (French), LIT (Italian), LSW |
|
|
|
|
| (Swedish) or LKA (Katakana). |
|
|
|
|
| NOTE: Current value is shown in PROFILE Window. |
LOE | OFF | ON |
| OFF | Lockout Enable. Enables/disables lockout function. |
|
|
|
|
|
|
LOI | 001 | 999 |
| 001 | Lockout ID. Lockout override identification number. |
|
|
|
|
|
|
44 | STAR TRAC S SERIES TREADMILLS OWNER’S MANUAL |