19.Secure the display to the console frame by installing six Phillips head screws with washers (Fig. 18) at the corresponding circled locations (Fig. 20).
Fig. 20
20.Mate the back shroud of the display with the rest of the assembly by installing eight Phillips head screws at the corresponding circled locations (Fig. 21).
Fig. 21
21.Dislodge the rear step shroud from the TreadClimber base (Fig. 22) and move the handrail grommets up the handrails.
Fig. 22
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL Assembly Instructions 28