Motor Calibration
The Motor Calibration function allows for calibration of the TreadClimber® speed function. CAUTION: Changing Max Speed setting may expose users to an increase in risk of injury. Any changes to the TreadClimber maximum speed settings should be clearly communicated to all users of the TreadClimber. To enter the Motor Calibration function:
1.While in the Maintenance Mode, press the 
key, to navigate the Motor Calibration by
the next 
or the previous 
parameter buttons.
2.While in the Motor Calibration, press the 
key to begin the calibration. The information window will display “PWM= XXXXXX SPEED=XX.X” where the X’s are data that the test will generate.
When the test is finished the information window will display one of the 2 messages “Passed Calibration” or “Failed Calibration”. If “Failed Calibration” is displayed run test again, if it continues, call for maintenance.
3.Press the STOP key to exit the Motor Calibration function.
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL Operating Instructions 46