Item | Lowest | Default | Highest | Meaning |
| Value | Value | Value |
|
|
|
|
|
|
Mc1 V X.XX | N/A | N/A | N/A | Display’s primary processor software version and checksum. |
LOCKOUT ID | 10000 | 12345 | 65535 | TreadClimber® lockout ID. |
MINIMUM | 0.5/0.8 | 0.5/0.8 | 2.0/3.2 | Minimum speed in mph (UNITS=English), or km/hr (UNITS=Metric). |
SPEED | 5.0/5.0 |
|
|
|
MAXIMUM | 10.0/16.0 | 12.5/20.0 | Maximum speed in mph (UNITS=English), or km/hr (UNITS=Metric). | |
SPEED | 3 |
|
| Caution: See Motor Calabration before making any changes. |
ACCELERATI- | 12 | 30 | Time, in seconds, to reach maxmium speed from 0 mph (0 km/hr). | |
ON TIME | 3 |
|
|
|
DECELERATI- | 11 | 30 | Time, in seconds, to reach 0 mph (0 km/hr) from maximum speed. | |
ON TIME | 1.00 |
|
|
|
DATE | 1.98 | 12.99 | TreadClimber manufacture date. | |
STOP | - | - | - | Either |
LAST DECK | 0 | 0 | 65,535 | Number of miles (UNITS=English), or km (UNITS=Metric) since the |
| 0 |
|
| running deck was last serviced or replaced. |
LAST BELT | 0 | 65,535 | Number of miles (UNITS=English) or km (UNITS=Metric) since the | |
| - |
|
| running belt was last replaced. |
PROGRAM | - | - | Provides access to programs usages and counters. (See Sub Menu) | |
STATS | - |
|
|
|
LED TEST | - | - | LED Testing function, Press OK to begin | |
KEYPAD | - | - | - | LED Testing function, Press OK to begin |
HEART RATE | - | - | - | HEART RATE Test function. |
TEST | - |
|
|
|
SERIAL | - | - | RS 232 Ports test (Manufacture Test Only). | |
TEST | - |
|
|
|
ERROR | - | - | Provides Access to Error List. | |
LAST ERROR | - | - | - | Last Error List Menu, Press OK to View |
LIST | - |
|
|
|
CALIBRATION | - | - | Provides Access to View Calibration Data. | |
VALUES | - |
|
|
|
MOTOR | - | - | Motor Calibration Function, Press OK to begin. | |
CALIBRATION | - |
|
|
|
TREADLE | - | - | Display current value of treadle sensor | |
SENSOR | - |
|
|
|
BURN IN | - | - | Burn In Mode Function (Manufacture Only). | |
MODE |
|
|
|
|
CCB V X.XX |
|
|
|
|
USB V X.XX |
|
|
|
|
When the MINIMUM SPEED or MAXIMUM SPEED parameters are changed, the unit will perform an auto calibration. To terminate the auto calibration and return the parameter to its default setting, press the STOP key.
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL Operating Instructions 45