28.Transport/push (Fig. 30) the TreadClimber to its final location by rolling it into position.
Fig. 30
29.Dislodge the rear step plugs (Fig. 31) to expose the wheel jacking bolts. Turn the bolts in a counter clock direction to retract the rear wheels into the base and rest the machine on the rear stabilizing feet.
Fig. 31
30.Wedge the cover plugs back into the rear step shroud once the TreadClimber is resting on the stabilizing feet.
31.Plug the power cord into the power & connections panel located at the front of the machine (Fig. 32).
Fig. 32
32.Power on the machine and enter into “Maintenance Mode” to process a “Motor Calibration” procedure. Once “Motor Calibration” is complete; the TreadClimber is ready for initial use.
TREADCLIMBER by STAR TRAC - OWNER’S MANUAL Assembly Instructions 31