Life Fitness M051-00K58-C362 Proactive Belt Wear Notification, HOW to Obtain Product Service

Page 43

TENSIONING AN EXISTING STRIDING BELT

1Enter the Manual workout and operate the treadmill for five minutes at 5.0 MPH (8.0 KPH).

NOTE: DO NOT RUN OR WALK ON BELT.

2Reduce the speed to 2.0 MPH (3.2 KPH). Walk on the treadmill. Tightly grip the handrails and apply force with feet on the striding belt near the motor cover against the moving belt direction. If the belt slips, continue to Step 3. If it does not slip, the tension is correct.

3Using the STOP key, stop the treadmill. Turn the belt tensioning bolts a quarter-turn clockwise for each side.

4Repeat STEPS 2 and 3 until the belt no longer slips. Do not exceed one full turn (four quarter turns) per side when adjusting the belt tensioning bolts.

5Enter the MANUAL workout and operate the treadmill at 2.0 MPH (3.2 KPH) check to insure proper tracking (See Section 6.5 “How to Adjust and Tension the Striding Belt”). If the striding belt drifts to the left or right see the topic titled Tracking (Centering) an Existing or New Striding Belt on the previous page.

Do not over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and damage the striding belt or roller bearings. Do not exceed one full turn of either bolt in either direction.

6.6PROACTIVE BELT WEAR NOTIFICATION

The treadmill proactively notifies the facility manager about belt wear through diagnostics. A single indicator is lit on the treadmill console (if manager-enabled) when a belt check is required. This indicator light is located in the upper left cor- ner of the workout profile window.

•Automatic belt check reminder at 30,000 miles (48,000 km)

•Notification based on “Cannot Attain Target Speed” errors for specific user weights/speeds: (The actual error message is "UNABLE TO ATTAIN TARGET SPEED")

TO CHECK FOR NOTIFICATIONS:

To enter Belt/Deck Info, press and hold the PAUSE key and press the CLEAR key twice. Continue to hold down the PAUSE key until the MESSAGE CENTER displays the words “SERVICE MENU”.

Then, release the PAUSE key, press the FAT_BURN key and then the ENTER_WEIGHT key. The MESSAGE CEN- TER displays "Belt/Deck Info" and then, if a notification has been triggered, displays a notification message "PLEASE CHECK BELT/DECK FOR SIGNS OF EXCESSIVE WEAR",`. If no notifications exist, the Belt/Deck Info area will display belt/deck information.

NOTE: Notifications are automatically cleared once they have been displayed.

6.7HOW TO OBTAIN PRODUCT SERVICE

1.Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and its features and workouts.

2.Locate and write down the serial number of the unit, which is located on a plate near the power switch.

3.Contact the nearest Life Fitness Customer Support Services group (refer to page one).

42

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Classic Series Treadmill EUROPE, Middle EAST, & Africa Corporate HeadquartersInternational Offices AmericasPage Table of Contents Classic Series Treadmill Getting Started Important Safety InstructionsFor Future Reference Démarrage Consignes DE Sécurité ImportantesConserver CES Instructions Pour Tout Usage Ultérieur Grounding Instructions SetupElectrical Power Requirements HOW to Position and Stabilize the Life Fitness TreadmillCentering the Belt Power SwitchFitness Networking Power Cord RoutingDisplay Console Overview Display ConsoleDisplay Console Description Page Reading Rack and Accessory Trays Heart Rate Zone Training Exercise WHY Heart Rate Zone Training EXERCISE?Lifepulsetm System Heart Rate MonitoringOptional Heart Rate Chest Strap Workout Overviews WorkoutsFitness Tests Using the WorkoutsPersonal Trainer Workouts Life Fitness Treadmill Workout Setup StepsWorkout Descriptions Hill Time in Zone Goal Custom WorkoutsCalories Goal Distance Goal127 BPM Heart Rate HilltmHeart Rate Intervaltm Extreme Heart Rate TM Inactive Active Very Active FIT TestRating 20-29 30-39 40-49 50-59 60+ Speed Interval Fitness TestsSelecting a Level Using Instapacetm FeedbackUsing Zerouttm Speed Control Maximizing Workouts on a Life Fitness TreadmillCOOL-DOWN Logging on to the NetworkDimming Entering and Using the MANAGER’S Configuration MANAGER’S ConfigurationConfiguration Factory Setting Default Description Configuration SettingsCREATING/CHANGING a Start Message Using Quick Start DisableUsing the Start Message Setup Programming Custom WorkoutsUser Language Select Marathon ModeSaving a Start Message Erasing a Start MessagePreventive Maintenance Tips Service and Technical DataWeekly Monthly Quarterly BI-ANNUAL Annual Preventive Maintenance ScheduleMalfunction Probable Cause Corrective Action Troubleshooting the TreadmillMalfunction Probable Cause Corrective Action Unit resets randomly or Insufficient power source Heart Rate Reading is Erratic or Absent Entirely Troubleshooting the Optional Heart Rate Chest StrapBelt Tensioning Bolts HOW to Adjust and Tension the Striding BeltTracking Centering a Striding Belt To Check for Notifications HOW to Obtain Product ServiceProactive Belt Wear Notification Tensioning AN Existing Striding BeltLife Fitness Classic Series Treadmill Specifications SpecificationsWarranty Information Life Fitness World Headquarters

M051-00K58-C362 specifications

The Life Fitness M051-00K58-C362 is a premium piece of fitness equipment that offers a combination of advanced technology, ergonomic design, and exceptional durability, making it ideal for both commercial and home gym environments. This model is particularly noted for its versatility and comprehensive features that cater to various fitness levels and training goals.

One of the main features of the M051-00K58-C362 is its adjustable resistance system, which allows users to customize their workouts easily. With a wide range of resistance levels, individuals can challenge themselves progressively, whether they are beginners or seasoned athletes. This adaptability is essential for accommodating different training styles, from rehabilitation exercises to high-intensity interval training (HIIT).

The M051-00K58-C362 is also equipped with an intuitive digital display that provides real-time feedback on critical workout metrics such as time, distance, calories burned, and heart rate. This data tracking capability helps users monitor their progress effectively and stay motivated throughout their fitness journey. The console interface is user-friendly, ensuring a seamless experience when selecting programs and adjusting settings.

Another notable characteristic of this model is its state-of-the-art built-in heart rate monitoring technology. The M051-00K58-C362 features both contact sensors and wireless receiver options, allowing users to select their preferred method for tracking heart rate data. This feature is crucial for ensuring that workouts are performed within the optimal heart rate zones for maximum efficiency and safety.

Comfort is also a priority in the design of this equipment. The ergonomic seat and handlebars are adjustable, providing a personalized fit for users of different heights and sizes. High-quality materials are used in its construction, ensuring that the Life Fitness M051-00K58-C362 can withstand intensive daily use while maintaining its performance levels.

Furthermore, the unit incorporates advanced stability features to prevent wobbling and promote a smooth workout experience, even during rigorous sessions. The platform is engineered for easy entry and exit, making it suitable for everyone, including those with mobility challenges.

In conclusion, the Life Fitness M051-00K58-C362 stands out due to its multi-dimensional capabilities, user-friendly technology, and commitment to providing an enjoyable workout experience. Whether for a commercial gym or a personal home setup, this equipment promises to meet diverse fitness needs effectively.
Top Page Image Contents