NordicTrack NTL11806.1 manual Not shown. Make sure that no wires are Pinched

Page 10

8.	Remove the band securing the Upright Wire	8
	Harness (73) to the right Upright (85). Have a	8
	Harness (73) to the right Upright (85). Have a
	second person hold the console assembly near
	the right Upright.	Console
	Connect the Upright Wire Harness (73) to the wire	Assembly
	Connect the Upright Wire Harness (73) to the wire
	harness on the console assembly. Make sure to
	connect the connectors properly (see the
	inset drawing). The connectors should slide	73
	together easily and snap into place. If they do	73
	together easily and snap into place. If they do
	not, turn one connector and try again. IF THE
	CONNECTORS ARE NOT CONNECTED			73
	PROPERLY, THE CONSOLE MAY BE DAM-	85		73
	PROPERLY, THE CONSOLE MAY BE DAM-	85
	AGED WHEN THE POWER IS TURNED ON.
	Then, insert the connectors into the right Upright
	(85).
9.	Remove the band securing the TV Cable (112) to	9
	the left Upright (85). Connect the TV Cable to	9
	the left Upright (85). Connect the TV Cable to
	the cable extending from the console assembly.
	Then, insert the TV Cable into the left Upright.
	Next, insert the brackets on the Handrails (70)			Bracket
	into the left Upright (85) and the right Upright
	(not shown). Make sure that no wires are
	pinched.			70
		Console		70
		Console
		Assembly		112
				112
				85
10. Attach the console assembly to the Uprights		10
	(85) with four Console Bolts (72) and four 3/8"	10
	(85) with four Console Bolts (72) and four 3/8"
	Star Washers (67) (only one side is shown).
	Start all four Console Bolts and then tighten
	them.
		85
			72	Console
		67		Console
		67		Assembly
		10

Image 10

Contents Model No. NTL11806.1 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Power Lines Service To External Antenna Before YOU Begin Make sure that the power cord is unplugged AssemblyFirmly tighten the Extension Leg Bolts Firmly tighten the Extension Leg Bolts Page Not shown. Make sure that no wires are Pinched Start all four Console Bolts and then tighten ThemPage Page HOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CableHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTurn on the fan if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove Identify yourself as user 1 or user HOW to USE a Preset ProgramSelect one of the fourteen preset programs Press the Start button to start the programHOW to USE a Pulse Program Select one of the four pulse programsTurn on the fan if desired HOW to Create a Custom Program Select one of the four custom programsHOW to USE a Custom Program HOW to USE AN Ifit Card Insert an iFIT Card and select a programHOW to USE the Stereo Sound System HOW to Operate the Personal TelevisionPress the Volume buttons to adjust the volume Press the Channel buttons to select Desired channelHOW to USE the Information Mode Press the Power button again and add or re Move channelsOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem Television reception is poor Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1107A Qty DescriptionOrdering Replacement Parts Exploded Drawing aExploded Drawing B-Model No. NTL11806.1 Exploded Drawing C-Model No. NTL11806.1 Exploded Drawing D-Model No. NTL11806.1 Limited Warranty