NordicTrack NTL77806.1 manual Again. if the Connectors are not CON

Page 7

2. Insert the other Extension Leg (97) into the indi-

2

 

cated bracket on the base of the Uprights (85) as

 

 

 

shown.

 

Bracket

 

 

Attach the Extension Leg (97) with two Extension

 

 

Leg Bolts (87), two Star Washers (67), and two

87

 

Extension Leg Nuts (91) as shown. Firmly

 

 

 

tighten the Extension Leg Bolts.

 

 

 

67

91

 

97

 

 

 

85

3. Attach the four Base Pads (81) to the base of the

3

 

Uprights (85) in the indicated locations with four

101

 

1" Tek Screws (82) and four Plastic Washers

 

 

(101). Note: One replacement Base Pad may be

 

 

included. Use the Base Pad to replace any Base

 

 

Pad that becomes worn.

 

81

With the help of a second person, carefully tip

 

82

 

101

the treadmill down so that the Base Pads (81)

 

 

 

are resting on the floor and the Uprights (85) are

 

85

in the vertical position.

 

 

 

 

101

 

 

81

 

 

82

 

 

101

4. Remove the band securing the Upright Wire

4

 

Harness (73) to the right Upright (85). Have a

 

Console

 

second person hold the console assembly near

 

Assembly

 

the right Upright.

 

 

 

Connect the Upright Wire Harness (73) to the

 

 

wires extending from the console assembly. Make

73

 

sure to connect the connectors properly (see

 

 

 

the inset drawing). The connectors should

 

 

slide together easily and snap into place. If

 

 

the connectors do not slide together easily and

 

85

snap into place, turn one connector and try

 

 

 

again. IF THE CONNECTORS ARE NOT CON-

 

73

NECTED PROPERLY, THE CONSOLE MAY

 

 

 

BE DAMAGED WHEN THE POWER IS

 

 

TURNED ON. Then, insert the connectors into

 

 

the right Upright (85).

 

 

 

7

 

Image 7
Contents Model No. NTL77806.1 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Treadmill is completely assembled AssemblyMake sure that the power cord is unplugged Ble. Do not fully fold the Frame untilAgain. if the Connectors are not CON Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the Power18. Note For simplicity, all instructions Your heart rate accurately. Before usingMake sure that your hands are clean Training ZonesWhenkey. you are finished exercising, remove Turn on the fan if desiredSelect one of the preset programs HOW to USE a Preset ProgramFollow your progress with the displays HOW to Create a Custom ProgramSelect one of the custom programs HOW to USE a Custom Program Insert an iFIT Card and select a program HOW to USE AN Ifit CardUSER’S Mode Optional Chest Pulse Sensor HOW to Adjust the Cushioning SystemHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked on Page Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesQty Description R0806AOrdering Replacement Parts Exploded Drawing a Exploded Drawing B-Model No. NTL77806.1 Exploded Drawing C-Model No. NTL77806.1 Exploded Drawing D-Model No. NTL77806.1 Limited Warranty