NordicTrack NTL21005.0 user manual Measure your heart rate if desired

Page 19

During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before your personal trainer describes the change.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the program.

To stop the walking belt at any time, press the Stop button on the console. To restart the pro- gram, press the Start button or the Speed in- crease button. After a moment, the walking belt will begin to move at 1 mph. When the next “chirp” is heard, the speed and/or incline will change to the next settings of the program.

When the program is completed, the walking belt will stop. Note: To use another MP3, CD, or video program, press the Stop button or remove the key and go to step 1 on page 18.

Note: If the speed and/or incline of the treadmill does not change when a “chirp” is heard:

Make sure that the letters “iFIT” appear in the matrix and that the time is not flashing in the display. If the time is flashing, press the Start button or the Speed increase button on the console.

Adjust the volume of your MP3 player, CD player, or VCR. If the volume is too high or too low, the console may not detect the program signals.

Make sure that the audio cable is properly connected.

If you are using a portable CD player and the CD skips, set the CD player on the floor or an- other flat surface instead of on the console.

Follow your progress with the matrix and the

4 display.

See step 5 on page 11.

5 Measure your heart rate if desired.

See step 6 on page 12.

6 Turn on the fans if desired.

See step 7 on page 12.

When you are finished exercising, remove the

7 key from the console.

See step 8 on page 14.

CAUTION: Always remove iFIT.com CDs and videocassettes from your CD player and VCR and disconnect your MP3 player when you are not using them.

19

Image 19
Contents Mon.-Fri a.m.-6 p.m. MST Sat a.m.-5 p.m. MST QUESTIONS?Model No. NTL21005.0 Serial No Customer HOT LineTable of Contents Important Precautions Page Left Side Before YOU BeginRight Side Try again. if the Connectors are not AssemblyHandrail Bolts PLS2 Make sure that no wires are pinched. See stepHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fans if desired Select one of the preset programs HOW to USE a Preset ProgramAdjust the intensity level of the program if Desired Measure your heart rate if desired Select a distance program HOW to USE a Distance ProgramPress the Start button to start the program HOW to Connect Your Portable Stereo HOW to Connect Your MP3 Player or CD PlayerAudio Cable HOW to Connect Your Computer HOW to Connect Your Home StereoPressVCR. the Play button on your CD player or HOW to Connect Your VCRMeasure your heart rate if desired Follow the on-line instructions to start Program Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Optional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Page Page Qty Description R0407AQty Description Exploded Exploded Drawing B-Model No. NTL21005.0 Exploded Drawing C-Model No. NTL21005.0 Exploded Drawing D-Model No. NTL21005.0 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT