HEART RATE MONITOR CARE AND MAINTENANCE
¥Thoroughly dry the heart rate monitor after each use. The heart rate monitor is activated when the electrode areas are wetted and the heart rate moni- tor is put on; the heart rate monitor shuts off when it is removed and the electrode areas are dried. If the heart rate monitor is not dried after each use, it may remain activated longer than necessary.
¥Store the heart rate monitor in a warm, dry place. Do not store the heart rate monitor in a plastic bag or other container that may trap moisture.
¥Do not expose the heart rate monitor to direct sunlight for extended periods of time. Do not expose the heart rate monitor to temperatures above 122¡ Fahrenheit (50¡ Celsius) or below 14¡ Fahrenheit
¥Do not excessively bend or stretch the transmitter when using or storing the heart rate monitor.
¥Clean the transmitter using water and mild soapÑ never use alcohol, abrasives, or chemicals. The chest strap may be hand washed and air dried.
¥If the heart rate monitor does not function prop-
erly, the CR 2032 bat- tery may need to be replaced. To replace the battery, locate the bat- tery cover on the back of the transmitter. Insert a coin into the slot in the
cover and turn the cover counterclockwise to the | ||
ÒopenÓ position. Remove the cover. |
| |
Remove the old battery |
| |
and insert a new CR |
| |
2032 battery, making |
| |
sure that the battery is | Battery | |
turned so the writing is | ||
| ||
on top. In addition, make | Rubber | |
sure that the rubber gas- | Gasket | |
ket is in place in the |
| |
transmitter. Replace the |
| |
battery cover and turn it |
| |
to the closed position. |
|
9