INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
12
A S S E M B LY STEP 5
HARDWARE BAG 5 CONTENTS :
BOLT (L) | ARC WASHER (J) |
120 mm | 17 mm |
Qty: 4 | Qty: 4 |
BOLT (L)
ARC WASHER (J)
CONSOLE MAST
HANDLEBARS
AOpen HARDWARE BAG 5.
BAttach LEFT HANDLEBAR to CONSOLE MAST using 2 BOLTS (L) and 2 ARC WASHERS (J). NOTE: Look into holes before inserting bolt to prevent cables from
being damaged.
CRepeat on other side.
A S S E M B LY STEP 6
HARDWARE BAG 6 CONTENTS :
SCREW (M) 10 mm Qty: 10
SCREW (M)
CONSOLE MAST COVER
CONSOLE MAST
A Open HARDWARE BAG 6.
BAttach LEFT CONSOLE MAST COVER to CONSOLE MAST using 5 SCREWS (M).
CRepeat on other side.
|
| Connect power plug to the treadmill |
POWER SWITCH | CIRCUIT BREAKER | and connect the cord to a power |
| ||
|
| outlet. The on/off switch is located |
|
| next to the power cord. Flip this |
|
| switch to the 'ON' position, so that |
|
| the switch is lit. You will hear a beep |
|
| and the console will light up. |
YOU’RE FINISHED!
13
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
T83_Treadmill_Rev.1.8.indd | 7/9/07 9:56:16 AM |