ASSEMBLY STEP 4
HARDWARE BAG 4 CONTENTS :
BOLT (E) | SPRING WASHER (C) | FLAT WASHER (D) |
15 mm | 15 mm | 15 mm |
Qty: 4 | Qty: 4 | Qty: 4 |
| WATER BOTTLE POCKETS | |
| CONSOLE CABLES | |
| CONSOLE | |
ASSEMBLE | FLAT WASHERS (D) | |
SPRING WASHERS (C) | ||
LEFT SIDE | ||
FIRST | BOLTS (E) | |
| ||
| CONSOLE MAST |
A Disengage the deck lock latch with your foot to lower the running deck.
BOpen hardware bag 4.
CGently place the console on top of the console masts. Attach the left side first using 2 bolts (E), 2 spring washers (C) and 2 flat washers (D).
DConnect the console cables, carefully tucking wires in masts to avoid damage.
EAttach the right side of the console using 2 bolts (E), 2 spring washers (C) and 2 flat washers (D).
Note: Be careful not to pinch any wires while assembling the console.
FInsert water bottle POCKETS into console.
GBefore the first use, lubricate the treadmill deck by following the instructions in the maintenance section in the treadmill guide.
YOU ARE FINISHED!
9