CAUTION: Before operating the console, read the following precautions.
¥Do not stand on the walking belt when turn- ing on the power or starting the walking belt.
¥Always wear the clip (see M on page 8) while operating the treadmill. If the key is pulled from the console, the walking belt will stop.
¥The treadmill is capable of high speeds; adjust the speed in small increments.
¥To reduce the risk of electric shock, keep the console dry. Avoid spilling liquid on the console and use only a sealable water bottle.
HOW TO ENTER USER INFORMATION
Each time the power is turned on, the USER 1 indicator will
begin to flash. The console allows up to three different users to enter their weight,
their age, and a maximum
heart rate setting into the console.
If you enter your weight into the console, the CALS/ FAT CALS display will be more accurate. If you want to use a pulse program, you must enter your age and a maximum heart rate setting.
If you want to enter your weight, your age, or a maxi- mum heart rate setting, follow the instructions below.
HOW TO TURN ON THE POWER
1Press the USER button.
Make sure that the on/off switch, located on the front of the treadmill, is in the on position.
On |
Press the USER button to designate yourself as user 1. The USER 1 indicator will remain lit without flashing. Note: To designate yourself as
user 2 or user 3, press the USER button repeat- edly. IMPORTANT: Each time you use the tread- mill, make sure that the correct user is selected.
Next, make sure that the power cord is properly plugged in (see page 9).
Step onto the foot rails of the treadmill. Find the clip attached to the key, and slide the clip onto the waistband of
your clothing. Pull the cord on the clip to make sure that the clip is securely
attached to your waistband. Next, insert the key into the console. After a moment, various displays and indi- cators will light.
To use the manual mode of the console, follow the steps beginning on page 13. To use a fat burn pro- gram or an aerobic program, see page 15. To use a pulse program, see page 16. To create and use a custom program, see pages 18 and 19. To use an iFit.com CD or video program, refer to page 23. To use an iFit.com program directly from our internet site, see page 25.
2Enter your weight if desired.
The current weight set- ting will be shown in the CALS/FAT CALS display. Press the + or Ð button to enter your weight. Each button press will change
the weight setting by 1 pound; if a button is held down, the weight setting will change in increments of 5 pounds. When your weight is shown, press the ENTER button. Note: Once your weight is entered, it will be saved in memory, even when the power cord is unplugged.
12