PROBLEM: The displays and indicators on the console remain lit after the key is removed
SOLUTION: a. Hold down the STOP button while inserting the key into the console. Make sure that there is not a ÒdÓ in the CALS/FAT CALS display. If a
ÒdÓ appears in the display, the console is in the ÒdemoÓ mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on
the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a ÒdÓ appears in the CALS/FAT CALS display, press the SPEED Ð button so the display is blank. Then, remove the key from the console.
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFit.com CDÕs and videos are played
SOLUTION: a. With the key in the console, press one of the incline buttons. While the incline is changing, re- move the key. After a few seconds,
29