USING THE START MESSAGE SETUP
This configuration allows for a custom
CREATING A START MESSAGE
After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and press ENTER. Use the SPEED ARROW keys to select an available letter, number or special character. Use the INCLINE ARROW keys to move forward or backward throughout the message, or insert spaces, one character at a time. The current character will blink until the position is moved with the INCLINE ARROW keys.
SAVING A START MESSAGE
To save the START MESSAGE, press ENTER. “MESSAGE SAVED” will appear in the message cen- ter confirming the message has been saved. To exit the start message setup without saving, press the clear key twice. “MESSAGE NOT SAVED” will appear in the message center confirming the mes- sage has not been saved.
ERASING A START MESSAGE
After entering the Manager’s Configuration, scroll to the START MESSAGE SETUP option and press ENTER. Press enter to enter the current START MESSAGE. Press the COOL DOWN key to erase the current START MESSAGE. “MESSAGE ERASED” will appear in the message center stating the message has been erased.
MARATHON MODE
Marathon Mode has no preset or setable goal. It allows the user to workout indefinitely. A work- out in Marathon Mode ends only if the user chooses to end it or a stop system is activated.
To use the mode, enable Marathon Mode (see below).
While setting up a workout, enter a time value greater than the upper limit displayed on the con- sole. Once the upper time limit is exceeded, the message center will display MARATHON MODE.
Within a workout, Marathon Mode can immediately ended by pressing the Time Key. Pressing the Time Key makes it possible to set a time goal as long as it's not less than the time already spent in the workout.
To enable the Marathon Mode, enter the Manager's Configuration (see section 5.1). Using the TIME UP / DOWN arrow keys, scroll to MARATHON MODE. Once MARATHON MODE appears in the Message Center, press any of the INCLINE or SPEED UP/DOWN ARROW KEYS to tog- gle the mode from OFF to ON.
29