11.Orient the Storage Latch (78) so that the large barrel and the Latch Knob (77) are in the posi- tions shown.
Remove the tie from the upper end of the Storage Latch (78). Attach the upper end of the Storage Latch to the bracket on the Frame Crossbar (39) with a 3/8" x 1 3/4" Bolt (5) and a 3/8" Nut (9).
Remove the tie from the lower end of the Storage Latch (78). Keep the holes in the Latch Cap (79) aligned with the holes in the Storage Latch. Make sure to keep the Latch Cap in- side the Storage Latch. Attach the Storage Latch to the bracket on the Base (115) with a 3/8" x 2" Bolt (6) and a 3/8" Nut (9). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket. Lower the Frame (61) (see HOW TO LOWER THE TREADMILL FOR USE on page 24).
12.Make sure that the Left Accessory Tray (90) and the Right Accessory Tray (100) are pressed firmly into the console assembly.
11 |
|
|
|
39 |
|
|
|
9 |
| 578 |
|
77 |
| Large | |
| Barrel | ||
115 | 9 | 79 | 6 |
12 |
| Console | |
|
| Assembly | |
90 |
|
|
|
|
|
| 100 |
13.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27). To protect the floor or carpet from damage, place a mat under the treadmill.
11