ASSEMBLY
To hire an authorized service technician to assemble the treadmill, call | ||
quires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of | ||
the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated | ||
with | ||
or the shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the | ||
walking belt, simply wipe off the lubricant with a soft cloth and a mild, | and | |
Assembly requires the included hex keys and your own Phillips screwdriver | ||
adjustable wrench | . |
|
For help identifying the assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging parts, do not use power tools for assembly. Extra hardware may be included.
3/8" Star |
|
| #8 x 3/4" Screw | 1/4" x 1 1/4" Bolt | |
3/8" Nut | |||||
Washer |
|
|
| ||
1/4" x 1 3/4" Bolt |
| 3/8" x 1 1/4" Patch Bolt | 3/8" x 1 | 3/4" Bolt | |
3/8" x 2" Bolt |
| 3/8" x 3 3/4" Patch Bolt | |||
1. Make sure that the power cord is unplugged. | 1 |
|
Locate two cardboard stands. With the help of a |
|
|
second person, raise the front of the treadmill |
|
|
and insert the crossbar on the Base (115) into |
|
|
the cutouts in the cardboard stands as shown. |
|
|
Make sure the cardboard stands are far |
|
|
enough apart to support the treadmill. |
|
|
Serious injury may occur if the treadmill |
|
|
moves forward or backward and falls off the |
|
|
cardboard stands. A second person must |
|
|
hold the treadmill until assembly step 3 is |
|
|
completed to prevent the treadmill from |
|
|
moving, tipping, or falling. | 115 | Cardboard |
| ||
|
| |
|
| Stands |
| 6 |
|