Epic Fitness EPTL89011.0 manual

Page 11

10.With the help of a second person, hold the con- sole assembly near the Left Handrail (88).

Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire.

11.Set the console assembly on the Left Handrail (88) and the Right Handrail (87). Be careful not to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail.

Attach the console assembly with six #8 x 1/2" Screws (1) and four 1/4" x 1/2" Screws (36) with four 5/16" Flat Washers (68) and four 1/4" Star Washers (35) as shown. Start all ten Screws, and then tighten them.

See step 7. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Bolts (4).

10

 

 

 

 

 

 

 

 

 

Console

 

 

 

 

Assembly

 

 

 

Console

 

 

 

 

 

Wire

 

 

Console

 

 

81

 

 

Wire

 

 

 

 

 

 

 

 

Wire

 

 

81

 

 

Tie

 

 

 

 

 

 

88

 

 

 

 

 

11

 

 

 

Console

 

 

 

 

 

 

 

 

Assembly

35

 

87

 

35

88

 

 

 

68

 

 

 

 

68

 

 

 

 

 

36

1

1

1

1

36

 

 

 

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. EPTL89011.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyAttach the Right Upright not shown See the inset drawing. Tie the wire tieBe careful not to pinch the Upright Wire Fully tighten the Screws yet. Note It may beBase Covers into place yet Shown. Start all four Screws, and then tighten Them Important To avoid damagingPage Console Assembly Make sure to follow All instructions This step Raise the Frame 56 to the position shown Chest Heart Rate Monitor HOW to PUT on the Heart Rate MonitorCare and Maintenance TroubleshootingHOW to Plug in the Power Cord Operation and AdjustmentConsole Diagram Features of the Console Insert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeTime display Change the incline of the treadmill as desiredFollow your progress with the displays Matrix-When Calories/InclineTurn on the fan if desired HOW to USE the Stereo Sound SystemThat the audio wire is fully plugged Measure your heart rate if desiredStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Start the workout. See on HOW to USE AN Ifit Live WorkoutInsert the iFit Live module into the console Select an iFit Live workoutInformation Mode HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

EPTL89011.0 specifications

The Epic Fitness EPTL89011.0 is a state-of-the-art treadmill designed for fitness enthusiasts looking to enhance their workout experience from the comfort of their homes. This model stands out for its robust construction, innovative features, and user-friendly technology, making it suitable for users of all fitness levels.

One of the key features of the EPTL89011.0 is its powerful motor. Equipped with a high-performance 3.0 CHP motor, this treadmill delivers smooth and consistent performance, allowing users to reach speeds of up to 12 mph. This level of power ensures that runners can achieve their goals, whether they are sprinting or engaging in a steady jog. Furthermore, the motor operates quietly, minimizing noise and allowing users to enjoy their workout without distractions.

The treadmill incorporates a generous running surface measuring 20” x 60”, which provides ample space for users to move freely. This spacious design is crucial for runners who require room to stride comfortably, reducing the risk of injury while exercising. Additionally, the EPTL89011.0 features an adjustable incline, enabling users to simulate uphill running and intensify their workouts.

User comfort is also a priority with the Epic Fitness EPTL89011.0. The treadmill is equipped with a high-quality cushioning system that absorbs impact, providing a softer surface for users' joints. This feature is especially beneficial for those who run regularly, as it helps minimize the strain on knees and ankles.

The console of the EPTL89011.0 is another highlight, featuring a large, easy-to-read LCD display that provides real-time feedback on essential workout metrics such as time, distance, speed, calories burned, and heart rate. The built-in heart rate monitor allows users to track their fitness levels more effectively.

Moreover, the treadmill comes with a variety of pre-set workout programs designed to cater to different fitness goals and preferences, including weight loss, endurance, and interval training. The EPTL89011.0 also supports Bluetooth connectivity, allowing users to sync their fitness apps and track their progress over time.

In summary, the Epic Fitness EPTL89011.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. Its powerful motor, spacious running surface, adjustable incline, and user-friendly features make it an excellent choice for anyone looking to achieve their fitness goals at home.
Top Page Image Contents