Epic Fitness EPTL89011.0 manual Assembly, Make sure that the power cord is unplugged

Page 7

ASSEMBLY

•To hire a service technician to assemble this product in your home, call 1-800-445-2480.

•Assembly requires two persons.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps.

•The underside of the walking belt is coated with high-performance lubricant. After shipping, there may be some lubricant on top of the walking belt or on the shipping carton. This is normal. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and a mild, non-abrasive cleaner.

•To identify small parts, see page 6.

•Assembly requires the following tools:

the included hex keys one adjustable wrench one Phillips screwdriver scissors

To avoid damaging parts, do not use power tools.

1. Make sure that the power cord is unplugged.

1

 

Place a piece of cardboard below the rear of the

 

 

 

Frame (56) to protect the floor or carpet.

 

 

Attach the Left Wheel Cap (96) to the Base (94)

 

 

with two #8 x 3/4" Screws (2).

 

56

Attach the Right Wheel Cap (not shown) to

 

 

the right side of the Base (94) in the same

 

 

way.

94

 

 

 

 

2

 

 

 

96

 

 

Cardboard

2. Pull the Upright Wire (81) and the Base Ground

2

 

Wire (110) through the indicated hole in the

 

 

 

Base (94).

 

 

Attach the Base Ground Wire (110) to the Base

 

77

(94) with a #8 x 1/2" Ground Screw (10).

Hole

 

Press the Grommet (77) into the square hole in

81

 

the Base (94).

 

 

 

10

110

 

94

 

7

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. EPTL89011.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyAttach the Right Upright not shown See the inset drawing. Tie the wire tieBe careful not to pinch the Upright Wire Fully tighten the Screws yet. Note It may beBase Covers into place yet Shown. Start all four Screws, and then tighten Them Important To avoid damagingPage Console Assembly Make sure to follow All instructions This step Raise the Frame 56 to the position shown Chest Heart Rate Monitor HOW to PUT on the Heart Rate MonitorCare and Maintenance TroubleshootingHOW to Plug in the Power Cord Operation and AdjustmentConsole Diagram Features of the Console Insert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeTime display Change the incline of the treadmill as desiredFollow your progress with the displays Matrix-When Calories/InclineTurn on the fan if desired HOW to USE the Stereo Sound SystemThat the audio wire is fully plugged Measure your heart rate if desiredSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout Start the workout. See on HOW to USE AN Ifit Live WorkoutInsert the iFit Live module into the console Select an iFit Live workoutInformation Mode HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

EPTL89011.0 specifications

The Epic Fitness EPTL89011.0 is a state-of-the-art treadmill designed for fitness enthusiasts looking to enhance their workout experience from the comfort of their homes. This model stands out for its robust construction, innovative features, and user-friendly technology, making it suitable for users of all fitness levels.

One of the key features of the EPTL89011.0 is its powerful motor. Equipped with a high-performance 3.0 CHP motor, this treadmill delivers smooth and consistent performance, allowing users to reach speeds of up to 12 mph. This level of power ensures that runners can achieve their goals, whether they are sprinting or engaging in a steady jog. Furthermore, the motor operates quietly, minimizing noise and allowing users to enjoy their workout without distractions.

The treadmill incorporates a generous running surface measuring 20” x 60”, which provides ample space for users to move freely. This spacious design is crucial for runners who require room to stride comfortably, reducing the risk of injury while exercising. Additionally, the EPTL89011.0 features an adjustable incline, enabling users to simulate uphill running and intensify their workouts.

User comfort is also a priority with the Epic Fitness EPTL89011.0. The treadmill is equipped with a high-quality cushioning system that absorbs impact, providing a softer surface for users' joints. This feature is especially beneficial for those who run regularly, as it helps minimize the strain on knees and ankles.

The console of the EPTL89011.0 is another highlight, featuring a large, easy-to-read LCD display that provides real-time feedback on essential workout metrics such as time, distance, speed, calories burned, and heart rate. The built-in heart rate monitor allows users to track their fitness levels more effectively.

Moreover, the treadmill comes with a variety of pre-set workout programs designed to cater to different fitness goals and preferences, including weight loss, endurance, and interval training. The EPTL89011.0 also supports Bluetooth connectivity, allowing users to sync their fitness apps and track their progress over time.

In summary, the Epic Fitness EPTL89011.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. Its powerful motor, spacious running surface, adjustable incline, and user-friendly features make it an excellent choice for anyone looking to achieve their fitness goals at home.
Top Page Image Contents