Epic Fitness EPTL89011.0 manual HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill

Page 24

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline to the lowest position before you fold the treadmill. Then, remove the key and unplug the power cord.

CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow below. CAUTION: Do not hold the frame by the plastic foot rails. Bend your legs and keep your back straight.

1

Frame

2.Raise the frame until the latch knob locks in the storage position. CAUTION: Make sure that the latch knob locks.

2

Frame

Latch

Knob

To protect the floor or carpet, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch knob is locked in the storage position. Moving the treadmill may require two people.

1.Hold the frame and one of the handrails, and place one foot against a wheel.

1

Frame

Handrail

Wheel

2.Pull back on the handrail until the treadmill will roll on the wheels, and carefully move it to the desired location. CAUTION: Do not move the treadmill without tipping it back, do not pull on the frame, and do not move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.See drawing 2. Hold the upper end of the tread- mill frame with your right hand. Then, pull the latch knob to the left. IMPORTANT: Do not turn the latch knob. If necessary, push the frame forward slightly. Pivot the frame downward a few inches, and release the latch knob.

2.See drawing 1 at the left. Hold the metal frame firmly with both hands, and lower it to the floor.

CAUTION: Do not hold the frame by the plastic foot rails, and do not drop the frame. Bend your legs and keep your back straight.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents QUESTIONS? Model No. EPTL89011.0 Serial NoCall TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedSee the inset drawing. Tie the wire tie Be careful not to pinch the Upright WireFully tighten the Screws yet. Note It may be Attach the Right Upright not shownBase Covers into place yet Important To avoid damaging Shown. Start all four Screws, and then tighten ThemPage Console Assembly Make sure to follow All instructions This step Raise the Frame 56 to the position shown HOW to PUT on the Heart Rate Monitor Care and MaintenanceTroubleshooting Chest Heart Rate MonitorOperation and Adjustment HOW to Plug in the Power CordConsole Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleChange the incline of the treadmill as desired Follow your progress with the displays Matrix-WhenCalories/Incline Time displayHOW to USE the Stereo Sound System That the audio wire is fully pluggedMeasure your heart rate if desired Turn on the fan if desiredHOW to USE AN Onboard Workout Select an onboard workoutStart the workout HOW to USE AN Ifit Live Workout Insert the iFit Live module into the consoleSelect an iFit Live workout Start the workout. See onInformation Mode HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

EPTL89011.0 specifications

The Epic Fitness EPTL89011.0 is a state-of-the-art treadmill designed for fitness enthusiasts looking to enhance their workout experience from the comfort of their homes. This model stands out for its robust construction, innovative features, and user-friendly technology, making it suitable for users of all fitness levels.

One of the key features of the EPTL89011.0 is its powerful motor. Equipped with a high-performance 3.0 CHP motor, this treadmill delivers smooth and consistent performance, allowing users to reach speeds of up to 12 mph. This level of power ensures that runners can achieve their goals, whether they are sprinting or engaging in a steady jog. Furthermore, the motor operates quietly, minimizing noise and allowing users to enjoy their workout without distractions.

The treadmill incorporates a generous running surface measuring 20” x 60”, which provides ample space for users to move freely. This spacious design is crucial for runners who require room to stride comfortably, reducing the risk of injury while exercising. Additionally, the EPTL89011.0 features an adjustable incline, enabling users to simulate uphill running and intensify their workouts.

User comfort is also a priority with the Epic Fitness EPTL89011.0. The treadmill is equipped with a high-quality cushioning system that absorbs impact, providing a softer surface for users' joints. This feature is especially beneficial for those who run regularly, as it helps minimize the strain on knees and ankles.

The console of the EPTL89011.0 is another highlight, featuring a large, easy-to-read LCD display that provides real-time feedback on essential workout metrics such as time, distance, speed, calories burned, and heart rate. The built-in heart rate monitor allows users to track their fitness levels more effectively.

Moreover, the treadmill comes with a variety of pre-set workout programs designed to cater to different fitness goals and preferences, including weight loss, endurance, and interval training. The EPTL89011.0 also supports Bluetooth connectivity, allowing users to sync their fitness apps and track their progress over time.

In summary, the Epic Fitness EPTL89011.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. Its powerful motor, spacious running surface, adjustable incline, and user-friendly features make it an excellent choice for anyone looking to achieve their fitness goals at home.
Top Page Image Contents