Epic Fitness EPTL89011.0 manual See the inset drawing. Tie the wire tie

Page 8

3. Identify the Left Upright (89), which is marked

3

 

 

 

 

with a “Left” sticker or an “L” sticker. Have a sec-

 

 

 

 

 

 

81

 

 

ond person hold the Left Upright near the Base

 

 

 

 

(94).

 

 

 

89

 

 

 

 

 

 

See the inset drawing. Tie the wire tie in the

 

 

 

Wire

 

Left Upright (89) securely around the end of the

 

 

 

81

 

 

 

Tie

Upright Wire (81). Then, pull the other end of the

 

 

 

 

wire tie until the Upright Wire is routed through

 

 

 

 

 

the Left Upright.

 

 

Wire

 

 

 

 

Tie

 

 

89

 

 

 

 

 

 

 

81

94

 

 

 

 

 

 

4. Hold the Left Upright (89) against the Base

4

 

 

 

 

(94). Be careful not to pinch the Upright Wire

 

 

 

 

 

 

 

 

 

(81). Insert two 3/8" x 1 1/4" Screws (8) with

 

 

 

 

 

two 3/8" Star Washers (13) and two 3/8" x

 

 

 

81

 

2 3/4" Screws (7) into the Left Upright.

 

 

 

 

 

 

 

 

 

Partially tighten the 3/8" x 2 3/4" Screws (7) and

 

89

 

 

 

 

 

 

 

 

the 3/8" x 1 1/4" Screws (8) until the heads of

 

 

 

 

 

the Screws touch the Left Upright (89); do not

 

 

 

 

 

fully tighten the Screws yet. Note: It may be

 

 

 

 

 

helpful to use the short hex key on the Screw

 

 

 

 

 

shown.

 

 

 

Hex

 

 

7

 

 

 

Attach the Right Upright (not shown) in the

 

 

Key

 

same way. Note: There are no wires on the

 

 

 

 

 

right side.

 

 

 

 

 

 

13

 

 

 

 

 

8

13

94

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents QUESTIONS? Model No. EPTL89011.0 Serial NoCall TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedSee the inset drawing. Tie the wire tie Be careful not to pinch the Upright WireFully tighten the Screws yet. Note It may be Attach the Right Upright not shownBase Covers into place yet Important To avoid damaging Shown. Start all four Screws, and then tighten ThemPage Console Assembly Make sure to follow All instructions This step Raise the Frame 56 to the position shown HOW to PUT on the Heart Rate Monitor Care and MaintenanceTroubleshooting Chest Heart Rate MonitorOperation and Adjustment HOW to Plug in the Power CordConsole Diagram Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleChange the incline of the treadmill as desired Follow your progress with the displays Matrix-WhenCalories/Incline Time displayHOW to USE the Stereo Sound System That the audio wire is fully pluggedMeasure your heart rate if desired Turn on the fan if desiredStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout HOW to USE AN Ifit Live Workout Insert the iFit Live module into the consoleSelect an iFit Live workout Start the workout. See onInformation Mode HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

EPTL89011.0 specifications

The Epic Fitness EPTL89011.0 is a state-of-the-art treadmill designed for fitness enthusiasts looking to enhance their workout experience from the comfort of their homes. This model stands out for its robust construction, innovative features, and user-friendly technology, making it suitable for users of all fitness levels.

One of the key features of the EPTL89011.0 is its powerful motor. Equipped with a high-performance 3.0 CHP motor, this treadmill delivers smooth and consistent performance, allowing users to reach speeds of up to 12 mph. This level of power ensures that runners can achieve their goals, whether they are sprinting or engaging in a steady jog. Furthermore, the motor operates quietly, minimizing noise and allowing users to enjoy their workout without distractions.

The treadmill incorporates a generous running surface measuring 20” x 60”, which provides ample space for users to move freely. This spacious design is crucial for runners who require room to stride comfortably, reducing the risk of injury while exercising. Additionally, the EPTL89011.0 features an adjustable incline, enabling users to simulate uphill running and intensify their workouts.

User comfort is also a priority with the Epic Fitness EPTL89011.0. The treadmill is equipped with a high-quality cushioning system that absorbs impact, providing a softer surface for users' joints. This feature is especially beneficial for those who run regularly, as it helps minimize the strain on knees and ankles.

The console of the EPTL89011.0 is another highlight, featuring a large, easy-to-read LCD display that provides real-time feedback on essential workout metrics such as time, distance, speed, calories burned, and heart rate. The built-in heart rate monitor allows users to track their fitness levels more effectively.

Moreover, the treadmill comes with a variety of pre-set workout programs designed to cater to different fitness goals and preferences, including weight loss, endurance, and interval training. The EPTL89011.0 also supports Bluetooth connectivity, allowing users to sync their fitness apps and track their progress over time.

In summary, the Epic Fitness EPTL89011.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. Its powerful motor, spacious running surface, adjustable incline, and user-friendly features make it an excellent choice for anyone looking to achieve their fitness goals at home.
Top Page Image Contents