Epic Fitness EPTL89011.0 manual HOW to Turn on the Power, HOW to USE the Manual Mode

Page 18

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components.

Plug in the power cord (see

page 16). Next, locate the

power switch on the tread- Reset mill frame near the power

cord. Press the power switch into the reset position.

IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and press the power switch into the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 23 to turn off the demo mode.

Next, stand on the

 

foot rails of the

 

treadmill. Find the

 

clip attached to the

Key

key and slide the clip

onto the waistband of

Clip

your clothes. Then,

insert the key into the

 

console. After a mo-

 

ment, the displays will light. IMPORTANT: In an emer- gency, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the posi- tion of the clip.

HOW TO USE THE MANUAL MODE

1.Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2.Select the manual mode.

If the manual mode is not already selected, press the Manual button on the console.

3.Start the walking belt.

To start the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons.

If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph. Note: After you press the button, it may take a moment for the walking belt to reach the selected speed setting.

If you press one of the numbered Quick Speed but- tons, the walking belt will gradually change speed until it reaches the selected speed setting. To se- lect a speed setting that includes a decimal—such as 3.5 mph—press two numbered buttons in suc- cession. For example, to select a speed setting of

3.5mph, press the 3 button and then immediately press the 5 button.

To stop the walking belt, press the Stop button. The time will begin to flash in the display. To re- start the walking belt, press the Start button or the Speed increase button.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Call TOLL-FREE QUESTIONS?Model No. EPTL89011.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedFully tighten the Screws yet. Note It may be See the inset drawing. Tie the wire tieBe careful not to pinch the Upright Wire Attach the Right Upright not shownBase Covers into place yet Important To avoid damaging Shown. Start all four Screws, and then tighten ThemPage Console Assembly Make sure to follow All instructions This step Raise the Frame 56 to the position shown Troubleshooting HOW to PUT on the Heart Rate MonitorCare and Maintenance Chest Heart Rate MonitorOperation and Adjustment HOW to Plug in the Power CordConsole Diagram Features of the Console Select the manual mode HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleCalories/Incline Change the incline of the treadmill as desiredFollow your progress with the displays Matrix-When Time displayMeasure your heart rate if desired HOW to USE the Stereo Sound SystemThat the audio wire is fully plugged Turn on the fan if desiredHOW to USE AN Onboard Workout Select an onboard workoutStart the workout Select an iFit Live workout HOW to USE AN Ifit Live WorkoutInsert the iFit Live module into the console Start the workout. See onInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT

EPTL89011.0 specifications

The Epic Fitness EPTL89011.0 is a state-of-the-art treadmill designed for fitness enthusiasts looking to enhance their workout experience from the comfort of their homes. This model stands out for its robust construction, innovative features, and user-friendly technology, making it suitable for users of all fitness levels.

One of the key features of the EPTL89011.0 is its powerful motor. Equipped with a high-performance 3.0 CHP motor, this treadmill delivers smooth and consistent performance, allowing users to reach speeds of up to 12 mph. This level of power ensures that runners can achieve their goals, whether they are sprinting or engaging in a steady jog. Furthermore, the motor operates quietly, minimizing noise and allowing users to enjoy their workout without distractions.

The treadmill incorporates a generous running surface measuring 20” x 60”, which provides ample space for users to move freely. This spacious design is crucial for runners who require room to stride comfortably, reducing the risk of injury while exercising. Additionally, the EPTL89011.0 features an adjustable incline, enabling users to simulate uphill running and intensify their workouts.

User comfort is also a priority with the Epic Fitness EPTL89011.0. The treadmill is equipped with a high-quality cushioning system that absorbs impact, providing a softer surface for users' joints. This feature is especially beneficial for those who run regularly, as it helps minimize the strain on knees and ankles.

The console of the EPTL89011.0 is another highlight, featuring a large, easy-to-read LCD display that provides real-time feedback on essential workout metrics such as time, distance, speed, calories burned, and heart rate. The built-in heart rate monitor allows users to track their fitness levels more effectively.

Moreover, the treadmill comes with a variety of pre-set workout programs designed to cater to different fitness goals and preferences, including weight loss, endurance, and interval training. The EPTL89011.0 also supports Bluetooth connectivity, allowing users to sync their fitness apps and track their progress over time.

In summary, the Epic Fitness EPTL89011.0 is a well-rounded treadmill that combines performance, comfort, and advanced technology. Its powerful motor, spacious running surface, adjustable incline, and user-friendly features make it an excellent choice for anyone looking to achieve their fitness goals at home.
Top Page Image Contents