Gold's Gym GGTL07819.0 manual Raise the Frame 48 to the position shown

Page 12

15.Raise the Frame (48) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (45) so that the large barrel and the Latch Knob (46) are in the posi- tions shown.

Attach the upper end of the Storage Latch (45) to the bracket on the Frame (48) with a 3/8" x 2" Bolt (9) and a 3/8" Nut (10).

Attach the lower end of the Storage Latch (45) to the Base (96) with a 3/8" x 1 3/4" Bolt (7). Note: It may be necessary to move the Frame (48) back and forth to align the Storage Latch with the Base.

Lower the Frame (48) (see HOW TO LOWER THE TREADMILL FOR USE on page 21).

15		48
	10	48
	10	9
		9
		45
		46
		Large
		Barrel 96
		7

16.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread- mill. Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 23 and 24).

12

Image 12

Contents QUESTIONS? Model No. GGTL07819.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetTighten the Nut the Wheel must turn freely Careful not to pinch the Wire Harness With a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star WasherTighten the Bolts yet Not fully fold the Frame yet Bolts yet Not Connected PROPERLY, the CON Sole MAY be Damaged When Screws before firmly tightening any of them Overtighten the Screws. Then, raiseRaise the Frame 48 to the position shown Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired. Before using Follow your progress with the matrixDisplays Matrix Turn on the fan if desiredHOW to USE a Personal Trainer Quick Program Select one of the personal trainer quick programsStart the program Follow your progress with the matrix and the displaysHOW to Create Your OWN Quick Program Select a custom quick programHOW to USE Your OWN Quick Program Select a custom quick programsInformation Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. GGTL07819.0 Key No. Qty DescriptionBlue Wire, M/F Userʼs Manual Exploded Drawing A-Model No. GGTL07819.0 R0809A Exploded Drawing B-Model No. GGTL07819.0 R0809A Exploded Drawing C-Model No. GGTL07819.0 R0809A Exploded Drawing D-Model No. GGTL07819.0 R0809A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT