Gold's Gym GGTL07819.0 manual Bolts yet

6.	Hold a Bolt Spacer (95) inside the lower end of	6
	the Left Upright (77). Insert a 3/8" x 4" Bolt (8)		8
	with a 3/8" Star Washer (11) into the Left					77
	Upright and the Bolt Spacer. Repeat this step
	with a second Bolt Spacer (95), 3/8" x 4" Bolt		11
	(8), and 3/8" Star Washer (11).				94
	Hold the Left Upright Spacer (94) and the Left	93	95
	Upright (77) against the Base (96). Tighten the
	3/8" x 4" Bolts (8) until the heads of the Bolts
	touch the Left Upright; do not fully tighten the		95	96
	Bolts yet.
	Press a Base Cap (93) into the Base (96).
	With the help of a second person, tip the tread-
	mill so that the Base (96) is flat on the floor.
7. Attach two Top Handrail Spacers (64) to the		7
	Uprights (77, 92) with two #8 x 3/4" Tek Screws
	(13).	13
		64			77
					13
					64	92
8. Hold a Bottom Handrail Spacer (68) against the		8
	Right Upright (92). Align the holes in the Bottom
	Handrail Spacer with the holes in the Top
	Handrail Spacer (64). Then, slide a Handrail
	(80) onto the Handrail Spacers. Attach the		5
	Handrail and Bottom Handrail Spacer to the	80
	Right Upright with two 5/16" x 1 3/4" Bolts (5);
	do not fully tighten the Bolts yet.					92
	Repeat this step with the other Handrail (80)			68	5
						64
	and Bottom Handrail Spacer (68).
					80	68
		9