Gold's Gym GGTL07819.0 manual With a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star Washer

Page 8

4. Hold a Bolt Spacer (95) inside the lower end of

4

 

 

 

 

the Right Upright (92). Insert a 3/8" x 4" Bolt (8)

 

8

 

 

with a 3/8" Star Washer (11) into the Right

 

 

 

 

Upright and the Bolt Spacer. Repeat this step

 

92

 

 

 

with a second Bolt Spacer (95), 3/8" x 4" Bolt

 

 

11

 

(8), and 3/8" Star Washer (11).

 

 

 

 

Hold the Right Upright Spacer (100) and the

 

 

 

 

95

Right Upright (92) against the Base (96). Be

 

 

 

 

careful not to pinch the Wire Harness (91).

 

 

 

 

 

Tighten the 3/8" x 4" Bolts (8) until the heads of

 

 

 

95

93

the Bolts touch the Right Upright; do not fully

 

 

 

tighten the Bolts yet.

 

 

 

10

 

Press a Base Cap (93) into the Base (96).

 

 

 

96

 

5. With the help of a second person, carefully tip

5

 

 

 

 

the treadmill onto its right side. Partially fold the

 

 

 

 

Frame (48) so the treadmill is more stable; do

 

 

 

 

 

not fully fold the Frame yet.

 

 

 

 

 

Attach a Wheel (99) with a 3/8" x 2" Bolt (9) and

 

 

 

9

 

a 3/8" Nut (10) to the Base (96). Do not over-

 

 

 

48

tighten the Nut; the Wheel must turn freely.

 

 

 

 

 

 

96

99

10

 

 

 

 

 

8

Image 8
Contents QUESTIONS? Model No. GGTL07819.0 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Pulse sensor is not a medical devicePage Before YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet Careful not to pinch the Wire Harness With a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star WasherTighten the Bolts yet Not fully fold the Frame yetBolts yet Not Connected PROPERLY, the CON Sole MAY be Damaged When Screws before firmly tightening any of them Overtighten the Screws. Then, raiseRaise the Frame 48 to the position shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired. Before using Follow your progress with the matrixDisplays Matrix Turn on the fan if desiredHOW to USE a Personal Trainer Quick Program Select one of the personal trainer quick programsStart the program Follow your progress with the matrix and the displaysHOW to Create Your OWN Quick Program Select a custom quick programHOW to USE Your OWN Quick Program Select a custom quick programsInformation Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USECompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on TopProblem Solution Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. GGTL07819.0 Key No. Qty DescriptionBlue Wire, M/F Userʼs Manual Exploded Drawing A-Model No. GGTL07819.0 R0809A Exploded Drawing B-Model No. GGTL07819.0 R0809A Exploded Drawing C-Model No. GGTL07819.0 R0809A Exploded Drawing D-Model No. GGTL07819.0 R0809A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty