Gold's Gym GGTL03607.4 manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver

and

adjustable wrench

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

1/4" Star Washer

M8 Star

M10 Star

Base Pad Spacer

M10 Nut (33)–2

(71)–2

Washer (10)–6

Washer (8)–4

 

 

 

(64)–2

 

Bolt Spacer (79)–4

M4.2 x 13mm

M4.2 x 19mm

M4.2 x 25mm Tek

Silver Screw (4)–1

Screw (1)–4

Screw (2)–4

#10 x 1" Tek

1/4" x 1/2"

M8 x 19mm

M10 x 50mm Bolt (27)–2

Screw (76)–2

Bolt (9)–2

Bolt (6)–6

 

 

M10 x 96mm Bolt (5)–4

 

6

Image 6
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. GGTL03607.4 Serial No On the WEBTable of Contents Important Precautions Treadmill is not in use. See the drawing on Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yetNot overtighten the Nut the Wheel must turn Freely Not fully fold the Frame yet Upright Spacer 80. Be careful not to pinch96mm Bolts 5 do not fully tighten Bolts yet Do not fully tighten the Bolts yetPage Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Follow your progress with the displayMeasure your heart rate if desired Turn on the fan if desiredHOW to USE a Classic Workout Press the Start button to start the workoutHOW to USE the Weight Loss Workout Select a weight loss workoutInformation Mode HOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on TopProblem Solution Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. GGTL03607.4 Key No. Qty DescriptionKey No. Qty Description Exploded Drawing A-Model No. GGTL03607.4 R1008A Exploded Drawing B-Model No. GGTL03607.4 R1008A Exploded Drawing C-Model No. GGTL03607.4 R1008A Exploded Drawing D-Model No. GGTL03607.4 R1008A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT