Gold's Gym GGTL03607.4 manual Make sure that the power cord is unplugged

Page 7

1.

Make sure that the power cord is unplugged.

1

 

 

 

 

 

 

 

With the help of a second person, carefully tip

 

 

77

Hole

 

 

 

the treadmill onto its left side. Partially fold the

 

 

 

 

 

 

Frame (48) so that the treadmill is more stable;

 

 

 

 

81

 

 

do not fully fold the Frame yet.

 

48

 

 

2

 

Cut the shipping tie securing the Upright Wire

 

 

 

 

 

 

 

 

 

 

 

 

 

(77) to the Base (85). Next, locate the plastic tie

 

 

 

 

85

 

 

 

in the indicated hole in the Base, and use the

 

 

 

 

 

 

 

plastic tie to pull the Upright Wire out of the hole.

 

 

 

 

 

 

 

 

Attach a Base Pad (81) to the Base (85) in the

 

64

 

 

 

 

 

 

location shown with an M4.2 x 25mm Tek Screw

 

81

2

 

 

 

 

(2) and a Base Pad Spacer (64). Then, attach

 

 

 

 

 

 

another Base Pad (81) with only an M4.2 x

 

 

 

 

 

 

 

 

25mm Tek Screw (2).

 

 

 

 

 

 

 

2. Attach a Wheel (86) to the Base (85) with an

2

 

 

 

 

 

 

 

M10 x 50mm Bolt (27) and an M10 Nut (33). Do

 

 

 

 

 

 

 

not overtighten the Nut; the Wheel must turn

 

 

 

 

 

 

 

 

freely.

 

 

 

 

 

 

 

 

 

 

27

 

 

 

 

 

 

 

 

 

86

85

 

 

 

 

 

 

 

33

 

 

 

3. Identify the Right Upright (78) and the Right

3

 

 

 

Wire Tie

 

 

 

Upright Spacer (80), which are marked with

 

 

 

 

 

 

stickers. Insert the Upright Wire (77) through the

 

 

 

 

78

 

 

 

Right Upright Spacer as shown. Then, set the

 

 

 

 

 

 

 

Right Upright Spacer on the Base (85).

 

77

 

 

 

 

77

 

Have a second person hold the Right Upright

 

 

 

 

 

 

(78) near the Base (85). See the inset drawing.

 

 

 

 

 

 

80

 

Tie the wire tie in the Right Upright securely

 

 

 

 

 

 

 

around the end of the Upright Wire (77). Then,

 

 

 

 

 

 

 

 

pull the other end of the wire tie until the Upright

 

 

 

 

 

 

 

 

Wire is routed completely through the Right

 

 

 

 

 

 

 

 

Upright.

 

 

 

 

 

85

 

 

 

 

78

 

 

 

 

 

 

 

 

 

 

77

 

Wire

 

 

 

 

 

 

Tie

 

 

 

 

 

 

7

 

 

 

 

 

 

Image 7
Contents On the WEB QUESTIONS?Model No. GGTL03607.4 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Treadmill is not in use. See the drawing on Before YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedNot overtighten the Nut the Wheel must turn Freely Do not fully tighten the Bolts yet Upright Spacer 80. Be careful not to pinch96mm Bolts 5 do not fully tighten Bolts yet Not fully fold the Frame yetPage Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramFollow your progress with the display HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleTurn on the fan if desired Measure your heart rate if desiredPress the Start button to start the workout HOW to USE a Classic WorkoutSelect a weight loss workout HOW to USE the Weight Loss WorkoutInformation Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Top Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. GGTL03607.4Key No. Qty Description Exploded Drawing A-Model No. GGTL03607.4 R1008A Exploded Drawing B-Model No. GGTL03607.4 R1008A Exploded Drawing C-Model No. GGTL03607.4 R1008A Exploded Drawing D-Model No. GGTL03607.4 R1008A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT