THE INFORMATION MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been used and the total number of miles that the walk- ing belt has moved. The information mode also allows you to select miles or kilometers as the unit of mea- surement for speed and distance. In addition, the infor- mation mode allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown:
The Time display will show the total number of hours the treadmill has been used.
The Distance display will show the total number of miles or kilometers that the walking belt has moved.
The center display will show the contrast setting for the center display. To change the contrast of the center display press the Incline in- crease and decrease but- tons.
An “E” for English miles or an “M” for metric kilometers will appear in the Speed dis- play. Press the Speed in- crease button to change the unit of measurement if de- sired.
Note: The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will
function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, al- though the buttons will not function. If the demo mode is turned on, a “d” will appear in the Speed display while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease but- ton.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM To play music or audio books through the consoleʼs stereo speakers, you must connect your MP3 player, CD player, or personal audio player to the console through the audio jack.
Locate the audio wire and plug it into the audio jack on the console. Then plug the audio wire into a jack on your MP3 player, CD player, or personal audio player.
Make sure that the audio wire is fully plugged in. Next, press the Play button on your MP3 player, CD player, or personal audio player. Then, adjust the vol- ume on your MP3 player, CD player, or personal audio player.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
20