THE INFORMATION MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to switch the console from miles per hour to kilometers per hour.
To select the information mode, hold down the PAUSE/STOP button while inserting the key into the console. When the information mode is selected, the following information will be shown:
The TIME display will show the total number of hours that the treadmill has been op- erated.
The DISTANCE/INCLINE dis- play will show the total num- ber of miles that the walking belt has moved.
The CALORIES/FAT CALO- RIES display will show an “E” for english miles or an “M” for metric kilometers. To change the unit of measurement, press the SPEED + button.
IMPORTANT: The SPEED display should be blank. If a “d” appears in the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is
used as a store display model. If the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays and indicators on the console will automatically light in a preset sequence, although the buttons on the console will not operate. If a “d” appears in the SPEED display when the information mode is selected, press the SPEED – button so that the SPEED display is blank.
To exit the information mode, remove the key from the console.
13