Healthrider H450I manual Dang ER Improperconnection, HOW to Plug in the Power Cord

OPERATION AND ADJUSTMENT

THE PRE-LUBRmCATED WALKmNG BELT

Your treadmHUfeatures a waUking beUtcoated with high° performance Uubrbant, IMPORTANT: Never apply sil- icone spray or other substances to the waJking beJt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANG ER: Improperconnection

of the equipment-grounding conductor can resuJt in an increased risk of eJectric shock.

Check with a qualified eJectrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the productJif it wHJ not fit the outlet, have a proper ouUet installed by a quaJified eJectrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your home's power, Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off, To decrease the possibility of your treadmill being damaged, aJways use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see your tocaJ NealthRider dealer or can the toN-free teJephone number on the front cover of this man- ual and order part number 146148, or see your JocaJ electronics store.

Use onJy a single-outlet surge suppressor that is UL 1449 Jisted as a transient voltage surge sup- pressor (TVSS}. The surge suppressor must have a UL suppressed vottage rating of 400 volts or tess and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni- toring Hght on the surge suppressor to indicate whether it is functioning properly. Failure to use a properJy functioning surge suppressor could resuJt in damage to the controt system of the treadmill. If the control system is damaged, the waJking belt may change speed, accelerate or stop unexpect- edly, which may result in a fail and serious injury.

This product must be grounded. If it should malfunc° tion or break down, grounding provides a path of least resistance for electric current, reducing the risk of ebc°

tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug, Plug the power cord into a surge suppressor, and pJug the surge suppressor into an appropriate

outlet that is properly installed and grounded in accordance with aH JocaJ codes and ordinances.

Important: The treadmill is not compatible with GFOl-equipped outJets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below, A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available,

	-Grounded		Outlet	Box
¢-1	_		9urge	Suppressor
I	['_	IS_.	Grounding Pin

_rounded Outlet Grounding Plug"_

2

_rounded Outlet Box

Adapter

Surge Suppressor

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician,

The greenocolored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover, Whenever the adapter is used it must be held in place by a metal screw, Some 2-poJe receptacle outJet box

covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is

grounded before using an adapter.

12