Healthrider H450I manual NOW to USE a Calorie Program

Page 17

Fottow your progress with the display.

See step 6 on page 15,

Measure your heart rate if desired.

See step 7 on page 15,

Turn on the fan if desired.

See step 8 on page 15,

When you are finished exercising, remove the key from the consote.

When the program has ended, make sure that the incline of the treadmill is at the towest set-

ting. Next, remove the key from the consob and put it in a safe pUace,Note: If the display remains tit after the key is removed, the consote is in

the "demo" mode. See page 19 and turn off the demo mode.

When you are finished using the treadmill, switch the reset/off circuit breaker to the "off"

position and unplug the power cord.

NOW TO USE A CALORIE PROGRAM

Insert the key into the consote.

See HOW TO TURN ON THE POWER on page 14,

Enter your weight.

See step 2 on page 14, Note: Always enter your weight before using a calorie program; the speed and incline settings of the program witt depend on the weight setting that you enter.

Select a caJode program.

To select a

calorie pro-p,, gram, press

the P1, P2, P3, or P4 button, After each calorie program is selected, the

maximum speed setting of the program and the maximum incline setting of the program wiii flash in the display for a few seconds, The display will also show how long the program will last, The ma- trix in the lower part of the display wiii show the first seven speed settings of the program,

Press the Start button to start the program.

A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings of the program, Hold the handrails and begin walking,

Each program is divided into 30, 35, 40, or 45 one-minute segments, One speed setting and one incline setting are programmed for each segment, Note: The same speed setting and/or incline setting may be programmed for two or more consecutive segments,

The speed

 

 

setting

for

_lmw

 

the first

seg-

_mlmm

 

mmm_mmtlfimllm

 

ment wiii be

If#AH_

PROGRAM

shown

in the

Current Segment

 

flashing

 

 

 

Current

 

 

 

Segment column of the matrix, (The incline set- tings are not shown in the matrix,) The speed set- tings for the next four segments wiii be shown in the columns to the right,

17

Image 17
Contents CALLTOLL-FREE Contents Extension cord IMPORTANT PrecautionsNeverleavethetreadmillunattendedwhileit 24DANGER. AlwaysunplugthepowerRight Side BackWasher 77anda BasePad89witha 11/4Tek Page Page First Page Dang ER Improperconnection HOW to Plug in the Power CordFeatures of the Console ME 9S S HOW to Turn on the PowerPage Eettindewiiimeeeriecei&,mntothe/eLl,The HOW to USE a Preset ProgramNOW to USE a Calorie Program Page Information MODE/DEMO Mode Optional Chest Pulse Sensor Rame HOW to Fold and Move the TREADMmLLLatch Knob TROUBLESHOOTmNG Page Exercise Frequency CONDiTiONiNG GUiDELiNESSuggested Stretches No. HRTL61706.1 Roto7A Part LIST--ModelOrdering Replacement Parts RTl II11 Exploded Drawing B--Model No. HRTL61706.1 Rolo7A Exploded Drawing C--Model No. HRTL61706.1 Rolo7A Exploded Drawing D--Model No. HRTL61706.1 nolo7A LiMiTED Warranty