Healthrider H500i manual Perform the first strength exercise when prompted

Page 15

4.Perform the first strength exercise when prompted.

When the first strength exercise segment be- gins (only one indicator will flash in

the current segment column), the walking belt will slow to a stop and the name of the first strength exercise will appear in the display for a few sec- onds.

Next, the

display will show the recom-

mended number of repetitions

for the first strength exercise.

Remove the clip from the waistband of your clothes, step off the treadmill, and prepare to begin the first strength exercise. Every few seconds, the console will sound a tone; when a tone sounds, perform one repetition of the exercise. Exercise with a slow, steady motion; do not perform more than one repetition each time a tone sounds. The display will count down the repetitions as you per- form them.

Note: Refer to the accompanying exercise chart to see the correct form for each exercise. When per- forming lunges, alternate legs with each repetition. When performing dumbbell rows, perform half the

repetitions with your right arm and half the repeti- tions with your left arm. The strength exercises re- quire the use of dumbbells and an inflatable exer- cise ball (not included). To purchase dumbbells or an exercise ball, call the telephone number on the front cover of this manual.

5.Continue the cross trainer program.

When you have performed the recommended num- ber of repetitions, the words PRESS START will appear in the display. To continue the cross trainer program, step onto the treadmill, slide the clip back onto the waistband of your clothes, and press the Start button. The treadmill will automati- cally adjust to the speed and incline settings for the next segment.

The program will continue in this way until the last segment ends. The walking belt will then slow to a stop.

6.Follow your progress with the display. See step 5 on page 13.

7.Measure your heart rate if desired. See step 6 on page 13.

8.Turn on the fan if desired. See step 7 on page 13.

9.When you are finished exercising, remove the key from the console.

See step 8 on page 13.

15

Image 15
Contents Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MST QUESTIONS?Model No. HRTL71706.1 Serial No Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Do not fully tighten the Screw yet AssemblyMake sure that the power cord is unplugged Leg. Firmly tighten the Extension Leg BoltsBase. Do not fully tighten the Screw yet Do not let the Wire Harness 77 fall into Right UprightFrame 58 until the treadmill is com Pletely assembled Extension Leg. Firmly tighten the Extension Leg BoltsTors are not Connected Properly Console MAY be Damaged When Connectors should slide together easilyPower is Turned ON. Insert the con Wires. Make sure that the ground wire seeMake sure that no wires are pinched Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerFollow your progress with the display Measure your heart rate if desiredTurn on the fan if desired Select one of the six cross trainer programs HOW to USE a Cross Trainer ProgramContinue the cross trainer program Perform the first strength exercise when promptedOptional Chest Pulse Sensor Information ModeHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingPage Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Qty Description R0108AExploded Drawing A-Model No HRTL71706 Exploded Drawing B-Model No. HRTL71706.1 R0108A Exploded Drawing C-Model No. HRTL71706.1 R0108A Exploded Drawing D-Model No. HRTL71706.1 R0108A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Related manuals
Manual 28 pages 29.54 Kb