Tunturi Complete Guide to T70 Treadmill: Features and Workout Profiles

Page 10

B. Rolling Hills is an interval exercise in which you can determine track speed yourself and set the distance to be run or the duration of the exercise. Rolling Hills allows you to regulate your speed using the PSC function. Unless you use PSC, this profile does not require the use of a heart rate belt. However, a heart rate belt will provide you with interesting additional information about your performance.

1.Press JOGWHEEL until the signal light shows the profile

4.Press JOGWHEEL to confirm your selection.

2.Press JOGWHEEL to move to profile duration (time / distance) setting. The previous duration set is shown on the display. Use the JOGWHEEL key to alternate between different setting values. You can change the value using the jogwheel (limit 10 minutes (10:00) – 3 hours (h3:00), adjusting at 5 minute steps / 1 km – 60 km, adjusting at 1 km steps).

3.Press START. The exercise begins and the belt starts moving. Use the speed control keys or PSC to adjust the speed. Pressing JOGWHEEL during the exercise will display elevation and heart rate profiles for the exercise.

4.You can scale the program elevation profile up and down using the jogwheel.

5.Press STOP and the treadmill stops and moves into waiting start for 5 minutes. You can restart the interrupted exercise by pressing the START key within 5 minutes or you can save your workout in the console’s memory (see Memory Function). Press the STOP key twice to end exercising and display feedback on your workout. The console then switches to its initial state.

6.The cool-down period will automatically start once you have completed the profile. After the cool-down the treadmill will stop. You can save your workout in the console’s memory (see Memory Function).

C. Heart rate controlled HRC profiles (5-8) are heart rate controlled exercise profiles with different effort levels that allow you to set the duration of the exercise. The heart rate controlled profiles always require the use of a heart rate belt. If heart rate measurement is not working correctly, the error message CHECK TRANSMITTER will be displayed. You should then make sure that you have properly followed the instructions on the use of the heart rate belt.

1.Press JOGWHEEL until the signal light shows next to the profile (5-8) you want. Press JOGWHEEL to confirm your selection.

2.Select the HRC mode with the jogwheel. Press

JOGWHEEL to confirm your selection.

3.Press JOGWHEEL to move to profile duration (time / distance) setting. The previous duration set is shown on the display. Use the JOGWHEEL key to alternate between different setting values. You can change the value using the jogwheel (limit 10 minutes (10:00) – 3 hours

(h3:00), adjusting at 5 minute steps / 1 km - 60 km, adjusting at 1 km steps, or 0.5 miles - 37 miles, adjusting at 0.5 mile steps)

4.Press START. The exercise begins and the belt starts moving.

5.You can scale the profile heart rate level up and down at 1% steps using the jogwheel.

6.Press STOP and the treadmill stops and moves

into waiting start for 5 minutes. You can restart the interrupted exercise by pressing the START key within

5 minutes or you can save your workout in the console’s memory (see Memory Function). Press the STOP key twice to end exercising and display feedback on your workout. The console then switches to its initial state.

7. The cool-down period will automatically start once

you have completed the profile. After the cool-down the treadmill will stop. You can save your workout in the console’s memory (see Memory Function).

PROFILES

(profile figures are at the back fold of the manual)

PROFILE 1 (Hill Walk). This profile is based on regular changes in elevation, combined with a fairly steady, brisk walking pace. The profile is suited to beginners and active walkers. The default values are preset to an average speed of 5.2 km/h and a top speed of 5.8 km/h, with an average elevation of 2.7%.

PROFILE 2 (Hill Jog). This profile is based on irregular changes in elevation, combined with a fairly steady, light jogging pace. The profile is suited to beginners as well as to those who want to maintain their fitness. The default values are preset to an average speed of 6.9 km/h and a top speed of 7.2 km/h, with an average elevation of 1.9%.

PROFILE 3 (Hill Run). This profile is based on a consistent, low elevation, combined with a brisk running pace with regular variation. The profile is suited to active runners. The default values are preset to an average speed of 11.6 km/h and a top speed of 12.5 km/h, with an average elevation of 1.8%.

PROFILE 4 (Rolling Hills). A distance profile where you can set the distance to be covered in kilometres. The profile is specifically designed for regular training, but also allows for varied routines in fitness training. The maximum distance is 60 km, with the default value preset to 3 km, adjusting at 1 km steps. The profile features interval type elevation settings, with an average elevation of 2.4%.

PROFILE 5 (Fat burner 1). A heart rate profile with a low level of effort, based on a regular rise and fall in the heart rate. The profile is suited to weight control. The default values are preset to an average heart rate of 114 bpm and a maximum heart rate of 125 bpm.

PROFILE 6 (Fat burner 2). A heart rate profile with a medium level of effort, based on an interval type rise and fall in the heart rate. The profile is suited to fitness training and weight control. The default values are preset to an average heart rate of 122 bpm and a maximum heart rate of 136 bpm.

PROFILE 7 (Cardio). A heart rate profile with a medium level of effort, based on a regular rise and fall in the heart rate. The profile is ideal for fitness training. The default values are preset to an average heart rate of 130 bpm and a maximum heart rate of 145 bpm.

PROFILE 8 (Fit). A heart rate profile with a high level of effort, based on a regular rise and fall in the heart rate. The profile is suited to demanding fitness training and improvement. The default values are preset to an average heart rate of 135 bpm and a maximum heart rate of 150 bpm.

10

Image 10
Contents T70 & T80 Contents Upright Tubes T70/T80Handlebar and Console Basics on Exercising Safety KEYPower Cord and Grounding Instructions About the Exercise EnvironmentBeginning AN Exercise Session About Using the EquipmentHeart Rate Finishing AN Exercise SessionDisplays ConsoleFunction Keys Graphic / Text DisplayChoosing AN Exercise PSC SettingsPosition Speed Control PSC Training with PSCManual Exercise Heart Rate Controlled ExercisePerforming the Cooper Test Exercise ProfilesCooper Test Beginning the Cooper TestProfiles Maintenance Memory FunctionMalfunctions Adjusting the Belt TensionError Codes Moving StorageTechnical Data 13,7 mphBienvenue Dans LE Monde DE ’ENTRAINEMENT Tunturi Conseils et avertissementsConseils et avertissements Tubes Verticaux Emballage 1/2Emballage 2/2 Guidon ET ConsoleCLE DE Verrouillage DE Securite Cordon D’ALIMENTATIONGénéralités SUR L’ENTRAÎNEMENT Unite DES Compteurs Touche DE Commande D’INCLINAISONRythme Cardiaque Touches DE FonctionGRAPHISME/AFFICHAGE DE Texte AffichagesRéglage DES Données Utilisateur Vitesse Contrôlée PAR POSITIONNE- Ment PSC Choisissez le mode d ’entraînement Manual, RollingTraining Avec LA Fonction PSC Entrainement PAR Controle DE LA FRE- Quence Cardiaque Choix DE L’ENTRAINEMENTManual ENTRAINE- Ment Manuel Quick Start Démarrage RapideLE Test DE Marche 2 KM Profils D’ENTRAINEMENTTest DE Condition Physique Test DE CooperAGE Fonctions DE LA Mémoire ProfilsEnregistrement DE VOS Propres Profils Entretien Utilisation DE Votre Propre ProfilFonction Compétition Nettoyage DE L’APPAREIL ET Graissage DE LA Plaque DE BaseDefauts DE Fonctionnement Transport ET RangementReglage DE LA Tension DU Tapis Coder D’ERREURCaracteristiques Techniques Angle d’inclinaison 12 % Moteur T70 T80105 M8x55 DIN FilterM13 DIN Washer Fixing tube M10 DIN Nut M8x42 ISO 102 M8x45 ISOT70, T80 Exploided View 10TUT70000 10TUT80000N E R ’ S 108 M a N U a L