10.While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with four #8 x 3/4" Screws (78); start all four
Screws and then tighten them. Avoid pinch- ing the wire harnesses during this step.
10
11
Console Wire
Harness
10
65
78 
Avoid pinching the
wire harnesses during this step
11.Orient a Pedal Arm (32) as shown. Attach the Left Pedal (34) to the Pedal Arm with three M8 x 40mm Button Screws (90) and three M8 Split Washers (97).
Repeat this step for the Right Pedal (not shown) and the other Pedal Arm (not shown).
11
34
32
97
97
90
10