NordicTrack NTE13920 user manual

Page 7

5.Slide a Weld Spacer (119) onto the axle on the left side of the Upright (2), with the open side of the Weld Spacer facing the Upright.

Locate the Upper Body Arm (118) that has the Left Upper Body Leg (31) inside of it (the Left Upper Body Leg is marked with a sticker). Hold the Upper Body Arm with one hand, hold the Left Upper Body Leg with your other hand, and slide the Upper Body Arm onto the axle on the left side of the Upright (2). Then, slide the Left Upper Body Leg out of the Upper Body Arm until it rests on the Ramp (3).

Have another person hold the Left Handlebar (24) near the Upright (2) as shown. Connect the left Pulse Sensor Wire (20) to the Pulse Extension Wire (114).

Slide the upper end of the Left Handlebar (24) into the tube on the front of the Upright (2), while sliding the lower end of the Left Handlebar onto the axle on the left side of the Upright. Attach the upper end of the Left Handlebar with two M8 x 41mm Button Bolts (85) and two M8 Jam Nuts (86); be careful not to damage the Wires (20, 114) as you insert the Button Bolts. Make sure that the Jam Nuts are resting in the hexagonal holes in the Left Handlebar. Attach the lower end of the Left Handlebar with an M8 x 38mm Button Bolt (105) and an M8 Jam Nut (86).

Attach the other Upper Body Arm (118) and the Right Handlebar (23) to the Upright (2) in the same way.

6.Look inside one of the Handlebar Covers (26) and locate the square tabs connecting the two halves. Gently lift the tabs and disconnect the halves.

Hold the two halves of the Handlebar Cover (26) around the tube on the left side of the Upright (2). Align the halves and press them together until they lock.

Attach the other Handlebar Cover (26) to the right side of the Upright (2) in the same way.

Hold the halves of the Upper Handlebar Cover (25) around the tube on the front of the Upright (2); be careful not to damage the Wires (not shown). Attach the Upper Handlebar Cover with an M4 x 12mm Screw (96).

5

23

 

 

85

 

114

 

20

24

 

 

86

 

119

 

118

105

 

 

118

 

2

 

86

 

31

 

3

6

 

 

25

 

25

 

2

 

96

 

26

 

26

 

26

7

Image 7
Contents Model No. NTE13920 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Right Side Before YOU BeginFront BackAssembly Page Page Wheels, Washer, and Upper Body Leg are oriented WiresBox. Be careful to avoid pinching the wires Bolt Set 65. Make sure that the Bolt Set, PedalHOW to PUT on the Chest Pulse Sensor HOW to USE the Chest Pulse SensorChest Pulse Sensor Troubleshooting Chest Pulse Sensor Care CR 2032 BatteryExercising on the Elliptical Exerciser HOW to USE the Elliptical ExerciserHOW to Plug in the Power Cord This product must be groundedConsole Diagram Features of the Console HOW to USE the Manual Mode Measure your heart rate if desired Right sideTurn on the fan if desired Begin pedaling to start the program HOW to USE Personal Trainer ProgramsBegin pedaling to activate the console Select one of the 15 personal trainer ProgramsMonitor your progress with the main display HOW to USE Heart Rate ProgramsSelect one of the four heart rate programs Wear the chest pulse sensor or hold Handgrip pulse sensor Enter your ageHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your Computer HOW to Connect Your VCR PressVCR. the play button on your CD player or Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteReturn to the elliptical exerciser and begin Pedaling HOW to Measure Your Body FAT Percentage Press the Enter button to start the program HOW to USE a Custom ProgramSelect a custom Fat Burn, Weight Loss, or Cardio program Press the Program buttonPress the Progress button HOW to Chart Your ProgressSelect a fat burn chart or a weight loss chart Reset the chart if desiredHOW to Move the Elliptical Exerciser Maintenance and TroubleshootingPulse Sensor Troubleshooting HOW to Calibrate the Incline RampExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesQty Description Part LIST-Model No. NTE13920111 Exploded DRAWING-Model No. NTE13920 109 100 110 93 63 126 101 112 113 104 111 1129 102 44 41 117 Limited Warranty HOW to Order Replacement Parts