NordicTrack NTEL12910 user manual HOW to Connect Your Computer, HOW to Connect Your VCR

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 1/8” LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into the LINE OUT jack on your computer.

A

LINE OUT

Audio

Cable

B. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into a 1/8” Y-adapter (available at electronics stores). Plug the Y-adapter into the PHONES jack on your computer. Plug your headphones or speak- ers into the other side of the Y-adapter.

B
	PHONES
	1/8”
Audio Cable	Y-adapter
Headphones/Speakers

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 16.

A. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into the adapter. Plug the adapter into the AUDIO OUT jack on your VCR.

A

ANT. IN

VIDEO AUDIO

IN

RF OUT

CH 3 4

OUT

AUDIO OUT

RIGHT

LEFT

Adapter

Audio Cable

B. Plug one end of the audio cable into the jack beneath the console. Plug the other end of the cable into the adapter. Plug the adapter into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

B

ANT. IN

VIDEO AUDIO

IN

RF OUT

CH 3 4

OUT

RCA Y-adapter

	Adapter
Audio Cable

Wire removed from

AUDIO OUT jack

17