NordicTrack NTEL12910 user manual Installing the Receiver for the Optional Chest Pulse Sensor

Page 8

INSTALLING THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR

If you purchase the optional chest pulse sensor (refer to page 19), follow the steps below to install the receiver and the Y-connector included with the chest pulse sensor.

1.Remove the four indicated screws from the back of the Console (87). Lift the top of the Console. Be careful not to disconnect any wires.

1

Screws

87

2.Peel the paper off the adhesive pad on the back of the receiver (A). Orient the receiver exactly as shown, and press it onto the Console (87) in the indicated location.

Connect the wire on the receiver (A) to the Y-connector

(B)as shown. Unplug the indicated console wire (C) from the indicated jack (D), and plug the console wire into the Y-connector. Then, plug the Y-connector into the jack (D).

Refer to step 1 above. Reattach the top of the Console

(87)with the four screws. Make sure that no wires are pinched.

Note: Any other wires that are included with the chest pulse sensor may be discarded.

2

 

 

D

 

C

 

B

 

A

87

Cylinder

8

Image 8
Contents Customer HOT Line QUESTIONS?Model No. NTEL12910 Serial No Table of Contents Important Precautions Before YOU Begin FrontBack Right SideAssembly Make sure Wire Harnesses 51, 85 do not Get pinched Damaged during This stepPage Installing the Receiver for the Optional Chest Pulse Sensor With the four screws. Make sure that no wires are pinchedHOW to USE the Elliptical Crosstrainer HOW to Adjust the PedalsHOW to USE the Upper Body Arms Exercising on the Elliptical CrosstrainerConsole Diagram Features of the ConsoleHOW to USE the Manual Mode Make sure that the power cord is pluggedSelect the manual mode Training Zone bar-The TrainingRight display-The right HOW to USE a Smart Program Select one of the eight smart programsStart the program Watch your progress with the two displaysHOW to USE a Heart Rate Program Select one of the heart rate programsEnter your age Hold the handgrip pulse sensorAudio Adapter Cable Headphones HOW to Connect Your Portable Stereo HOW to Connect Your Home StereoHOW to Connect Your Computer HOW to Connect Your VCRPressVCR. the play button on your CD player or HOW to USE Programs Directly from OUR WEB Site Optional Chest Pulse SensorNever use abrasives or solvents Maintenance and TroubleshootingHOW to Level the Elliptical Crosstrainer Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. NTEL12910 Qty DescriptionDRAWING-ModelNTEL12910EXPLODEDNo HOW to Order Replacement Parts Limited Warranty