ParaBody cm3 manual Short Cable

FIGURE 15
3/8 X 4-1/4”	68
		37
		51
	2
	29	64
	42	63
		65
		SHORT CABLE

STEP 15:

•Assemble one 3-1/2” PULLEY (37) to the BOOM PLATES (14 & 15) using one 3/8 X 4-1/4” BOLT (68), two 3/8” SAE WASHERS (64), two GUIDE CABLES (65), two 3/8 X 1” SPACERS (51) and one 3/8” LOCK NUT (63). See FIGURE 15.(Note: Loop the

WEIGHT STACK CABLE around the PULLEY prior to assembling to the BOOM PLATES.)

•Screw the short threaded end of the WEIGHT STACK CABLE (29) into the end of the PULLEY BRACKET (9) .See FIGURE 15.

•Disassemble the SHORT CABLE and the turnbuckle on the GUIDE CABLE (65) as shown in FIGURE 15. The SHORT CABLE will be reassembled later.

14